Hotpoint Water Heater 75/100 User's Manual | Page 7
565
729
430
79
A
D
C
B
Multipoint
Capacities 75 and 100 litre.
Rating 3.0kW @ 240V (2 x 1.5 kW), (2.8kW @ 230V (2 x 1.4 kW)). 6.0kW @ 240V (2 x
3.0 kW), (5.6kW @ 230V (2 x 2.8 kW))
Outer casing White plastic top and base mouldings with steel centre section finished
in white stove enamel.
Thermal insulation CFC/HCFC free (ODP zero) GWP 3.1 (Global Warming Potential)
flame-retardant expanded polyurethane.
Water container 2 x Heavy gauge copper inner containers.
Type tested to 20 bar (290 psi)
Heat unit Replaceable Superloy 825 alloy sheathed rod-type elements.
Thermostat Capillary thermostats, adjustable from 5°C to 75°C.
Safety features Manually re-settable thermal cut-outs.
Factory-fitted temperature and pressure relief valves set to operate at 7 bar and 90°C.
Anode Not required.
Approvals BEAB and kiwa approved to UK water supply regulations.
Manufactured in the UK in a BS EN ISO 9001:2000 registered factory.
Electrical The unit must be permanently connected
to the electrical supply through a double-pole linked
switch with minimum breaking capacity suitable for
the loading. Must conform to current IEE wiring
regulations.
Specification
Multipoint is covered by the Heatrae Sadia on-site parts and labour guarantee.
Multipoint inner container is guaranteed for a period of five years and its immersion
heater and thermal control for a period of two years from the date of purchase against
faulty manufacture and materials provided that:
• Has been correctly installed as per the instructions contained in the instruction manual
and all relevant codes of practice and regulations in force at the time of installation.
• Has not been modified in any way, other than by Heatrae Sadia Heating.
• Has been regularly maintained in accordance with the instructions contained in the
instruction manual.
• Has not been damaged by frost or due to scale.
• Has only be used with potable water.
• Has not been tampered with or been subjected to misuse or neglect.
• Registration card has been completed by the user and returned to Heatrae Sadia
within 60 days of installation together with the proof of purchase.
• Has been installed in the United Kingdom.
• The guarantee is transferable.
• The guarantee does not affect your statutory rights.
The unit is not guaranteed against damage by frost. The Multipoint immersion heater
and thermal controls are guaranteed for a period of two years, from the date of
purchase, with the exception of damage due to excessive scaling. Evidence of
purchase and date of supply must be submitted. The guarantee will not be
transferable. This guarantee does not affect your statutory rights.
Guarantee
Must be installed by a competent person in accordance with local Regulations.
England and Wales - Building Regulations G3, Scotland - Technical Standards P3,
N. Ireland - Building Regulations P5.
Fixing Mounting brackets supplied loose. Must be mounted in the vertical position
with inlet/outlet at the bottom. Temperature and pressure relief valves factory fitted to
the top of the heater.
Plumbing Connections 15mm copper tube tails. Minimum water pressure 0.8 bar (12
psi). Discharge from tundish 22mm compression
Tundish Multipoint 75 & 100 units are supplied with a tundish. Inlet – 1⁄2" BSP male.
Outlet – 3⁄4" BSP female.
Service valve 15mm compression.
Safety valve discharge Temperature and pressure relief valve and expansion valve
must be plumbed to discharge in a safe visible manner. (Tundish supplied).
Installation
Ordering guide
Model
Rating
Product code
@ 240V
kW
Multipoint 75
3
95:050:170
Multipoint 75
6
95:050:171
Multipoint 100
3
95:050:172
Multipoint 100
6
95:050:173
Pack U3 (TMV2)
95:970:354
Pack U7 (TMV3)
95:970:360
Dimensions and capacities
Diagram | Dimensions | Specification | Installation | Guarantee | Ordering guide 07
Specification Advice Tel 01603 420220 Fax 01603 420229 E-mail specifier@heatraesadia.com
Model
Capacity
A
B
C
D
litre
mm
mm
mm
mm
Multipoint 75
75
1055
911
824
843
Multipoint 100
100
1213
1069
982
1001
Related Manuals for Hotpoint Water Heater 75/100
-
A.O. Smith Water Heater BTX-100 Specification Sheet
2 pages
-
A.O. Smith Water Heater Cyclone BFC - 60 Installation Manual
98 pages
-
A.O. Smith Water Heater EES - 52 Specification Sheet
4 pages
-
A.O. Smith Water Heater ProMax Power-Vent GPVH-50 Instruction Manual
32 pages
-
A.O. Smith Water Heater Promax Short ECS-40 Instruction Manual
28 pages
-
A.O. Smith Water Heater Promax Tall ECT-52 Instruction Manual
28 pages
-
A.O. Smith Water Heater Promax Tall ECT-55 Instruction Manual
28 pages
-
A.O. Smith Water Heater Promax Tall ECT-80 Instruction Manual
28 pages
-
Electrolux Water Heater EWH-SL/SLN User's Manual
4 pages
-
Whirlpool Water Heater E1F50RD045V User's Manual
16 pages
-
Whirlpool Water Heater Energy Smart EE2H40RD045V User's Manual
15 pages
-
Rheem Water Heater Ruud G100-200(A) User's Manual
2 pages
-
Redring Water Heater 1070810E User's Manual
8 pages
-
GSW Water Heater SUPERFLUE POWER VENTED GAS FIRED WATER HEATER User's Manual
18 pages
-
Rheem Water Heater Professional Prestige Series: Hybrid Heat Pump Use & Care Manual
24 pages
-
Rheem Water Heater Tankless Electric RTE 13 Use & Care Manual
16 pages
-
A.O. Smith Water Heater GCVL-40 Technical Documents
32 pages
-
A.O. Smith Water Heater ATI-540H-N Technical Documents
64 pages
-
Rinnai Water Heater RUR98i (REU-KBP3237FFUD-US) Specification Sheet
2 pages
-
Rinnai Water Heater RUR98i (REU-KBP3237FFUD-US) Operation and Installation Manual
61 pages
-
Rinnai Water Heater RUC80i (REU-KBD2530FFUD) Operation and Installation Manual
140 pages
-
Rinnai Water Heater RUC98i (REU-KBD3237FFUD) Operation and Installation Manual
140 pages
-
Rinnai Water Heater RUC98i (REU-KBD3237FFUD) Specification Sheet
2 pages
-
Rinnai Water Heater RL94i (REU-VC2837FFUD-US) Specification Sheet
2 pages