Hotpoint Oven Accessories SX 1049Q CX User's Manual | Page 5

Hotpoint Oven Accessories User's Manual - Oven Accessories SX 1049Q CX.
Download
Page  of 20
4.3, 2357 votes
background image

GB

5

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

! The first time you use your appliance, heat the
empty oven with its door closed at its maximum
temperature for at least half an hour. Make sure that
the room is well ventilated before switching the oven
off and opening the oven door. The appliance may
emit a slightly unpleasant odour caused by
protective substances used during the
manufacturing process burning away.

! Turn the control dial to adjust the parameter shown
on the display between the “<” and “>” symbols.

! To make the setting process easier, keep the
control dial in position: this will increase the scrolling
speed of the numbers on the display.

! Each setting will automatically be stored in the
appliance memory after 10 seconds.

! The touch controls cannot be activated if the user
is wearing gloves.

Some models are equipped with a system of hinges
which allows the door to close slowly, without the
user having to follow the movement through with his/
her hand. To use the system correctly, before
closing the door:
• Open the door fully.
• Do not force the closing movement manually.

Switching the oven on for the first time
After connecting the oven to the electricity supply,
the first time it is switched on the user should also

switch on the control panel by pressing the 
button. The list of languages will appear in the
menu.  To choose the desired language, select it

using the control dial. Confirm by pressing the 
icon.
Once the selection has been made, the display will

show the settings menu. Press the 

 icon or scroll

through using the control dial until you reach the

EXIT command and press the 

 icon to begin

using the oven.

! After choosing the language in the menu, if the
display is not used for another 30 seconds it will
automatically revert to programming mode.

Setings menu commands
To enter the settings menu, switch on the control

panel and press the 

 icon.

Use the control dial to highlight the individual menu

commands.

To modify the setting, press the 

 icon.

The following parameters are listed in the menu:
LANGUAGE: select the language shown on the
display.
CLOCK: set the exact time.
TONE: activate/deactivate keypad tone.
LIGHT: activate/deactivate the internal oven light
during cooking.
LOGO: activate/deactivate logo on start-up.
GUIDE: activate/deactivate operating tips.
EXIT: exit the menu.

! It is possible to exit the settings menu by pressing

the 

 icon.

Control panel lock
! The control panel can be locked while the oven is
off, once cooking has started or finished and during
programming.

The control panel lock can be used to lock the
controls.
To activate it, press the 

 icon and select the

desired command by pressing the control dial:
• NO LOCK: deactivate an active lock;
• BUTTONS: lock the controls;
Confirm by pressing the 

 icon.

A confirmation buzzer will sound and the 

 icon will

appear on the display.
The lock may be activated while the oven is in use,
or while it is switched off. It can also be deactivated
in all the above situations and after the oven has
finished cooking.

Setting the clock

To set the clock, switch on the oven by pressing the 

icon, then press 

 and follow the steps described.

1. Scroll through the menu commands using the

control dial, select CLOCK and press 

.

2. Adjust the time using the control dial.
3. Once you have reached the correct hour value,

press the 

 icon.

4. Repeat steps 2 and 3 to set the minutes.

5. To exit adjustment mode, press the 

 icon or

use the control dial to scroll through the menu until

you reach EXIT, then press 

.

! The clock can also be set while the oven is off, by

pressing the 

 icon and carrying out steps 2 to 4

Start-up and use

Related Manuals for Hotpoint Oven Accessories SX 1049Q CX

0.501219s