Hotpoint Ice Maker ffaa52k-1 User's Manual | Page 4

Hotpoint Ice Maker User's Manual - Ice Maker ffaa52k-1.
Download
Page  of 12
4.3, 1894 votes
background image

4

GB

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

DOOR REVERSAL

Warning: Before attempting to remove the doors, switch off the electrical supply and pull out the mains plug.
It is recommended that you remove any loose items/fittings from inside the appliance and place food into insulated 
containers whilst carrying out this operation.
You may require assistance to carefully lay the appliance onto its back onto suitable protective materials (i.e. original 
packaging).

Remove the doors 
1. Lay down the appliance on its 
back.
2. Unscrew, remove and retain the 
bottom hinge.
3. Slightly open the bottom door 
and slide downward remove and 
carefully place to one side
4. Remove centre hinge and 
spacer if fitted. Slightly open the 
top door and slide downwards, 
remove and carefully place to one 
side.
5.“The pin will be removed  and 
fixed to the opposite side.
6. Use a thin blunt instrument to 
remove the top and bottom hinge 
bushes and blanking plugs from 
the doors, take care not to mark 
the door handle. Reposition the 
blanking plugs and bushes on the opposite side. 
7.  Fit the blanking plugs provided into the right hand two centre hinge holes.  
8.  Before changing hinge place from right side to left side, screw on left side panel should be disassemblied and 
after changing hinge place, screw should be assemblied on right side panel.

       

Replacing the doors
1. Slide the top door upwards and locate the top hinge pin into the door bush. Reposition the centre hinge on the 
opposite side.
2. Carefully slide bottom door upward 
into the centre hinge pin.
3. Unscrew the bottom hinge pin and 
refit it on the opposite side..
4. Fit the bottom hinge making sure 
that the door is aligned to the cabinet.
5. Carefully stand the appliance 
upright in it’s required location and 
make sure it is sitting level on the floor. 
Open and close the doors checking 
that the gasket makes a good seal 
without any gaps when the doors are 
closed.

Note: Replace loose items/fittings 
back into the appliance and leave for 
at least 15 minutes before switching 
back on.

0.514207s