Hotpoint Ice Maker ffaa52k-1 User's Manual | Page 10

Hotpoint Ice Maker User's Manual - Ice Maker ffaa52k-1.
Download
Page  of 12
4.3, 1894 votes
background image

10

GB

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the fol owing list.

Malfunctions:

The POWER indicator light does not 
illuminate.

The refrigerator and the freezer do not 
cool well.

The food inside the refrigerator is 
beginning to freeze.

The motor runs continuously.

The appliance makes a lot of noise.

There is water at the bottom of the 
refrigerator.

Possible causes / Solutions:

•  The plug has not been inserted into the electrical socket, or not far 

enough to make contact, or there is no power in the house.

 
•  The doors do not close properly or the seals are damaged.
•  The doors are opened too frequently.
•  The TEMPERATURE ADJUSTMENT knob is not in the correct position
•  The refrigerator or the freezer have been over-filled.

•  The TEMPERATURE ADJUSTMENT knob is not in the correct position.
•  The food is in contact with the back inside wall of the refrigerator.

•  The door is not closed properly or is continuously opened.
•  The outside ambient temperature is very high.
•  The thickness of the frost exceeds 2-3 mm (see Maintenance).

•  The appliance has not been installed on a level surface (see 

Installation).

•  The appliance has been installed between cabinets that vibrate and 

make noise.

•  The internal refrigerant makes a slight noise even when the 

compressor is off. This is not a defect, it is normal.

•  The water discharge hole is blocked (see Maintenance).

Donít forget should our advice fail to resolve the problem with your appliance please call us on 08448 224 224 to 
arrange an engineer visit. Or visit www.hotpointservice.co.uk 

Product failures are fully covered by your 12 months parts and labour guarantee. However, if we attend and 
there is no product failure or the failure has been caused by damage, misuse or by incorrect installation, 
charges will apply.

0.538070s