Hotpoint HSS25ATHWW Use & Care Manual | Page 9

Hotpoint Side-by-Side Refrigerators Use & Care Manual - HSS25ATHWW.
Download
Page  of 128
4.6, 1984 votes
background image

9

 

About the shelves and bins. 

GEAppliances.com

Not all features are on all models.

QuickSpace™ Shelf (on some models)
This shelf splits in half and slides under itself for 

storage of tall items on the shelf below.
This shelf can be removed and replaced or 

relocated just like Slide-Out Spillproof Shelves.

On some models, this shelf can not be used in 

the lowest position.

Slide-Out Freezer Shelves
To remove,
 slide out to the stop position, lift the 

front past the stop position, and slide out from 

rib.

Make sure you push the shelves all the way 

back in before you close the door.

Fixed Freezer Shelves

To remove, lift the shelf up at the left side and 

then bring the shelf out.

NOTE FOR DISPENSER MODELS: In order to 

take full advantage of the tilt-out ice bin (on 

some models), only store items on the shelf 

below the ice bin that are no taller than the 

lowest point on the bin.

Door Wine/Beverage Rack 
(on some models)

This rack holds up to 5 cans, one bottle of 

wine or one 2-liter bottle of soda.
The rack hangs from the sides of the dairy bin.
To remove:

Empty the wine/beverage rack.
 Holding the bottom of the dairy bin, lift the 

front straight up, then lift up and out.
 To detach the rack from the dairy bin, pull 

the rack’s side wires out of the holes on 

each side of the dairy bin.

ShelfSaver™ Rack  
(on some models)

Use this rack to store 

beverage cans for easy 

access.
It can also hold a 9” x 13” 

baking dish.

Door Can Rack 
(on some models)

Removable Beverage Rack 
(on some models)

The beverage rack is designed to 

hold a bottle on its side. It can be 

attached to any slide-out shelf.

1

2

This door rack holds up to 9 cans.
NOTE: This rack can only be 

mounted in the top position under 

the dairy bin.

To replace:

Reattach the rack to the sides of the bin.

 Engage the back side of the bin in the 

molded supports on the door. Then push 

down on the front of the bin. The bin will 

lock into place.

To install: 

 Line up the large part of the 

slots on the top of the rack with 

the tabs under the shelf.
 Then slide the rack back to lock 

it in place.

0.598761s