Hotpoint CIB 644 B E User's Manual | Page 5

Hotpoint Video Game Controller User's Manual - CIB 644 B E.
Download
Page  of 12
4.8, 1406 votes
background image

5

GB

PLEASE PHONE US TO REGISTER YOUR APPLIANCE  AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

To switch the hob on, press and hold the 

 button for 

approximately one second.

The cooktop is switched On when a beep sound is 
emmited  and all the cooking zones displays show 
the digit point.

When the cooktop is OFF, after 5 sec the control

 

.

 switches off the KEYLOCK LED to reduce the power 
consumption.
As soon as we touch a key, the KEYLOCK LED  goes 
ON and we can continue to use the cooktop, unlocking 
the keyboard.

Switching off the cooktop is signalled by 3 beep sound

Setting the Power Management
The cooktop maximum power limit is 7200W. This power 
limit can be reduced by the user to 2800W, 3500W or 
6000W.
The sequence to set a new Cooktop Power Limit is:
·During the first 30 seconds after plugging the applian-
ce
·The Touch has to be unlocked and all Heaters Off
·Press at the same time Heater 1 and Heater 3 selection 
keys
·Once this is done, a beep sounds and the actual Co-
oktop Power Limit will be shown in the heater displays.
For selecting a new Power Limit:
·With the (+) and (-) keys, the Power Limit is increased. 
The selectable powers are: 2800W, 3500W, 6000W or 
7200W. When the power is 7200W, if the [+] or [-] key is 
touched the power changes to 2800W.
The sequence to finish recording the new Cooktop Po-
wer Limit is:
·Press at the same time Heater 1 and Heater 3 selection 
keys
·Once this is done, new Cooktop Power Limit is recor-
ded and there is a system reset.

To finish without recording changes:
·If during 60 seconds there is no action, changes are not 
recorded and there is a system reset.
.

•  Loud whistle: heard when two induction elements of 

the same group function simultaneously at maximum 
power and/or when the booster function is set on 
the larger element while the other is auto-adjusted. 
Noise is reduced by decreasing the power level of the 
auto-adjusted induction element; pot bottom layers 
made of different kinds of materials are among the 
main causes of this noise.

• Fan noise: a fan is necessary to ensure the hob functions 

correctly and to safeguard the electronic unit from 
possible overheating. The fan functions at maximum 
power when the large induction element is at maximum 
power or when the booster function is on; in all other 
cases, it works at average power depending on the 
temperature detected. Furthermore, the fan may continue 
to work even after switching the hob off, if the temperature 
detected is high.

The types of noise listed above are due to induction 
technology and are not necessarily operational faults.
! If the (-) or (+)button is pressed for an extended period 
of time, the display scrolls quickly though the power 
levels and timer minutes.

Initial Light Conditions

When power is initially applied to the Cooktop, the to-
uch control conducts a calibration process for the to-
uch keys, which requires a low level of ambient light in 
the area of the touch keys.
If during this calibration process excessive ambient 
lighting is detected the User Interface displays „FL” 
(Infrared Ambient Light Error) and the control cali-
bration process is suspended. In order to rectify the 
process any lighting that could effect the calibration 
process should be switched off (e.g. halogen cooker 
hood lighting). The error will disappear when satisfac-
tory ambient lighting is detected and the touch control 
calibration procedure will now complete satisfactorily. 

-The „FL” error can only be generated within approx 3s 
of initial power being applied to the cooktop.
-We recommend that the user switches off all cooker 
hood lighting and lighting directed towards the cook-
top when power is initially applied to the cooktop.
-After the touch control has conducted its initial cali-
bration process, (approx 3s) any cooker hood or other 
lighting can be switched on as normal and will not af-
fect the operation of the touch control.

Switching on the hob

After connecting the hob to the electricity mains, the 
touch pannel might be automatically locked. To un-
clock the pannel press and hold the Control Panel 

Loock button 

.

Related Manuals for Hotpoint CIB 644 B E

0.529862s