Hotpoint Aquarius WF250 User's Manual | Page 6

Hotpoint Washer/Dryer User's Manual - Aquarius WF250.
Download
Page  of 11
4.2, 2473 votes
background image

Using your Machine

STEP 5

On-Off / Selecting a programme...

To stop or change a programme...

Progress indicator lights...

Programme listing

Door Locked indicator light

Progress indicator lights

‘Start/Cancel’
button

Programme selector dial

Variable Spin Speed dial

Variable Temperature dial

Option buttons

‘On/Off’ button

The machine is switched on by pressing the ‘On/Off’ button for 2 seconds. All the indicator lights will light up for a few seconds and
the ‘Door Locked’ indicator light will flash once.
Turn the programme selector dial to the desired programme. Load the laundry and detergent. Select the options you require.
Press the ‘Start/Cancel’ button for 2 seconds to start the programme.

Press the ‘Start/Cancel’ button for 2 seconds.
Select ‘Pump Out’ on the programme selector dial.
When the machine has finished emptying, turn the programme selector dial to the new programme (you may need to add
detergent). Press the ‘Start/Cancel’ button to start the programme.

● If you cancel a hot wash programme, take care when removing the laundry, it might still be very hot.

These will light up when you choose a programme, to indicate
the progress of the selected programme. When started, the
first light in the cycle will stay lit and as the programme 
progresses, successive lights will come on until the 
programme finishes.

Door Locked indicator light...

● The ‘Door Locked’ indicator light will come on two 

seconds after you press the ‘Start/Cancel’ button and will 
stay lit throughout the programme. A short time after the 
programme has finished the indicator light will go out and 
you can then open the door.

● Selected programmes will not start if the door is not closed 

properly, the ‘Door Locked’ indicator light will flash to show
this. Push the door shut until you hear the catch click.

WARNINGS:
● In the unlikely 

event of  something 
not working, see 
‘Troubleshooting’
STEP 8.

0.501913s