Hoover Hoover Clothes Dryer condenser tumble dryer User's Manual | Page 10

Hoover Dryer User's Manual - Hoover Clothes Dryer condenser tumble dryer.
Download
Page  of 14
4.3, 2180 votes
background image

To Remove the Condenser

Important: Always switch off and remove the 
plug from the electricity supply before cleaning 
the condenser.
To maintain the efficiency of the dryer regularly 
check that the condenser is clean.

1 . R e m o v e   t h e  
kickplate 

2. Turn the two locking 
levers  anti-clockwise 
a n d   p u l l   o u t   t h e  
condenser.

3 . P u l l   o u t   t h e  
condenser unit.

4.  Gently  remove  any 
dust or fluff with a cloth, 
then  wash  the  unit  by 
holding  it  under  a 
running  tap  turning  it 
so  that  water  flows 
between the plates, to 
remove  any  dust  or 
fluff.

5. Refit the condenser 
ensuring  it  is  in  the 
c o r r e c t   w a y   ( a s  
indicated by the arrow) 
and pushed firmly into 
place.  Lock  the  two 
levers by turning them 
clockwise.

6. Refit the kickplate.

CONDENSER

EN 10

OPERATION

1.  Open  the  door  and  load  the  drum  with 
laundry.  Ensure  that  garments  do  not  hinder 
closure of the door.

2. Gently close the door pushing it slowly until 
you hear the door 'click' shut.

3. Turn the Programme Selector dial to select 
the required drying programme (see Program-
me Guide).

4. If drying synthetics, acrylics or delicate items,
press the Delicates button to reduce the heat 
level.
The  light  next  to  the  push  button  will  light  up 
when  the  machine  is  in  low  heat  setting.  To 
deselect  in  the  first  few  minutes  of  the 
programme,  press  the  Delicates  button,  after 
this  time  reset  the  machine  to  change  the 
setting.

5. Press the Start/Pause button. The dryer will 
start automatically and the DRY indicator will be 
continuously lit.

6. If the door is opened during the programme to 
check  the  laundry,  it  is  necessary  to  press 
Start/Pause  to  recommence  drying  after  the 
door has been closed.

7.  When  the  cycle  is  nearing  completion  the 
machine  will  enter  the  cool  down  phase,  the 
clothes will be tumbled in cool air allowing the 
load to cool down.

8. When the programme is complete the END 
indicator will light. 

9.  Following  the  completion  of  the  cycle  the 
drum  will  rotate  intermittently  to  minimize 
creasing. This will continue until the machine is 
switched OFF or the door is Opened.

0.544417s