Honeywell RCWL8000 Installation Information | Page 8

Honeywell Door Chime Installation Information - RCWL8000.
Download
Page  of 56
4.4, 1211 votes
background image

InstallationandUse

69-2108EFS—01

6

3.  Fix the door camera base in place using the screws and 

wall plugs provided.

4.  Hook the door camera into the base at the top first, then 

push and click it in at the bottom. Check that the unit is 
evenly pressed in place to seal the unit from rain damage. 
Make sure that the sealing strip on the camera front 
remains in place. Insert the two screws underneath, and 
tighten.

Check that the unit is working after installation by pressing the 
call button, the confidence light should illuminate.

Installing the door camera

Mount the door camera
Do not mount the camera in wet conditions as moisture or condensation will affect 
the internal parts.
Once you have tested the system in place, mount the camera onto a 
wall or door as follows:

1.  Remove the two screws underneath the door camera. Unhook 

and release the front and pull it away from the base. Note the 
TOP arrow on the base.

TOP

2.  If mounting to a wall, mark the location of the four 

mounting holes using the camera base as a template. 
Drill using a 1/4-in. (6 mm) masonry bit. The distance 
between mounting holes is 2.8 in. (72 mm) horizontally 
and 3.6 in. (92 mm) vertically.

69-2108EFS_A.indd   6

11/30/2007   1:51:47 PM

Related Manuals for Honeywell RCWL8000

0.578619s