Honeywell DUCT-MOUNT AND OUTDOOR-MOUNT H7635B User's Manual
INSTALLATION INSTRUCTIONS
63-2579—3
H7625B; H7635B,C; H7655B
Duct-Mount and Outdoor-Mount
Humidity/Temperature Sensors
APPLICATION
The H7625B, H7635B, H7655B Duct-Mount and H7635C
Outdoor-Mount Humidity/Temperature Sensors are
universal Relative Humidity transmitters that can be
powered with either a +18 to 36 Vdc or 24 Vac supply.
The sensors use a half-wave bridge rectifier to convert
AC power to a usable DC voltage. The device also
includes a 20K ohm temperature sensor for optional use.
The humidity sensors are designed with a field-
selectable 4 to 20 mA, 0 to 5 Vdc, or 0 to 10 Vdc output
signal equivalent to 0 to 100% RH. All units are shipped
from the factory with a default setting to accept AC power
with three-wire, 0 to 10 Vdc loop-powered output.
INSTALLATION
When Installing this Product...
1. Read these instructions carefully. Failure to follow
them could damage the product or cause a
hazardous condition.
2. Check ratings given in instructions and on the
product to ensure the product is suitable for your
application.
3. Installer must be a trained, experienced service
technician.
4. After instal ation is complete, check out product
operation as provided in these instructions.
CAUTION
Electrical Shock or Equipment Damage
Hazard.
Can shock individuals or short equipment
circuitry.
Disconnect power supply before installation.
CAUTION
Equipment Damage Hazard.
Improper wiring can damage the sensor
beyond repair.
Follow the wiring instructions carefully.
Mounting
The method of mounting depends on the particular
sensor application. The following procedures include
outdoor and duct applications. Also refer to the
instructions for the electronic control.
Duct Mounting
The H7625B, H7635B and H7655B can be mounted in a
duct to sense humidity and temperature.
IMPORTANT
Select a location to expose sensor to average
duct humidity and temperature. Avoid locations
where stratification can cause sensing errors.
NOTES:
—
H7635C is weatherproof for outdoor use.
Knockouts allow 1/2 in. conduit connection.
—
To avoid damaging board during installation,
the cover can be detached completely:
1.Careful y remove wire plug from board.
2.Set the cover aside.
1. Cut a hole in the duct just large enough to accept
the sensing element.
2. Open case by rotating the cover counterclockwise.
3. Mount standard 1/2 in. conduit to the case.
4. Use case to mark mounting screw pilot hole
locations.
5. Drill the pilot holes and fasten the sensor to the
duct.
6. Wire the sensor. See Wiring section.
NOTE: The two free wires are thermistor wiring
connections. When connecting these, use
two wire nuts.
7. Reattach the wire plug and cover being careful not
to pinch wires between the cover and case.
Related Manuals for Honeywell DUCT-MOUNT AND OUTDOOR-MOUNT H7635B
-
Firex Smoke Alarm i4618 Series User's Manual
18 pages
-
Firex Smoke Alarm i4618A Series User's Manual
19 pages
-
First Alert Smoke Alarm SC9120B User's Manual
11 pages
-
First Alert Smoke Alarm SA710 User's Manual
6 pages
-
Honeywell Smoke Alarm FIRE-LITE 411UDAC Installation Manual
88 pages
-
Kidde Smoke Alarm i12060A User's Manual
18 pages
-
Kidde Smoke Alarm 1276 User's Manual
7 pages
-
Universal Security Instruments Smoke Alarm USI-5204 User's Manual
8 pages
-
Kidde Smoke Alarm i12060 User's Manual
17 pages
-
Kidde Smoke Alarm i9080 User's Manual
18 pages
-
Kidde Smoke Alarm 1235 User's Manual
6 pages
-
Firex Smoke Alarm I240C User's Manual
8 pages
-
Bosch Smoke Alarm FPD-7024 User's Manual
122 pages
-
Honeywell Smoke Alarm Photoelectronic Smoke/Temperature Detector 5808W3 User's Manual
4 pages
-
Siemens Smoke Alarm Synova FC330A User's Manual
58 pages
-
Siemens Smoke Alarm FP-11 User's Manual
4 pages
-
BRK electronic Smoke Alarm 4919 User's Manual
2 pages
-
System Sensor Smoke Alarm 2W-B User's Manual
4 pages
-
Orbit Manufacturing Smoke Alarm Rokonet ORBIT-6 RP-206 User's Manual
37 pages
-
Apollo Smoke Alarm XP95 User's Manual
24 pages
-
LST Smoke Alarm Series BC216 User's Manual
73 pages
-
LST Smoke Alarm Vds EN 12094-1 User's Manual
4 pages
-
Kidde Smoke Alarm I12040 User's Manual
17 pages
-
Firex Smoke Alarm i4618A Series User Manual
19 pages