Heath Zenith Wireless Chime TR-0095-RX User's Manual

Heath Zenith Door User's Manual - Wireless Chime TR-0095-RX.
Download
Page  of 20
4.2, 2150 votes
background image

© 2007 HeathCo LLC 

598-1171-03

This package includes (Style of push button and chime may vary from illustration):
•  Wireless chime cover 

•  Wireless chime base

•  Wireless push button w/battery 

•  Hardware pack

You'll need to buy 2 “C” alkaline batteries for the chime. In typical use, alkaline 
batteries will last up to one year.

Wireless Chime

TR-0095-RX

TYPE

C

Battery Cover

Battery Cover 
Catch

1.  Install alkaline type A23 12 volt push button battery. 

Remove back of case by pushing in tab on bottom with 
a  small  screwdriver.  Make  sure  battery  is  oriented 
properly (see page 3).

2.  Remove chime cover (see page 4).
3.  Install  2  alkaline “C”  batteries.
  Press  in  catch  on 

bottom of battery cover and lift to remove. Make sure 
batteries are oriented properly.

TYPE

C

TYPE

C

1 2 3 4 5 6 7 8

4.  Test range. Temporarily position chime and push but-

ton where you want them mounted. Press push button 
to verify chime and push button work properly. If chime 
does not sound, see Troubleshooting.

5.  Mount push button. Use either screws or double sided 

tape to mount push button.

•  To  mount  with  screws,  remove  back  of  case  by 

pushing in tab on bottom with a small screwdriver. 
Attach back of case to door jamb or wall. Snap front 
of push button on.

•  When attaching push button using double sided tape, 

make sure the surface of the door jamb or wall is 
clean.

Related Manuals for Heath Zenith Wireless Chime TR-0095-RX

0.536107s