Harbor Freight Tools 10 Ft. x 20 Ft. Portable Car Canopy Product manual | Page 4

Harbor Freight Tools Covers Product manual - 10 Ft. x 20 Ft. Portable Car Canopy.
Download
Page  of 12
4.2, 1332 votes
background image

Page 4

For technical questions, please call 1-800-444-3353.

Item 69034 

        

Assembly

  Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this 

manual including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY: 

Do not leave this product partially assembled.  Assemble this product completely at one time.

Note: For additional information regarding the parts listed in the following pages,  

refer to Parts List and Diagram on page 10.

Note: Much of this product’s assembly is done using slip fit construction.  Make sure all parts seat completely 

and securely.  A rubber mallet (sold separately) can be used to gently tap parts in place to ensure a tight fit.

Figure 1:  Roof Assembly - 1

5

2

2

4

2

3

3

3

2

2

2

5

2

4

2

6

6

2

4

5

5

2

4

2

1.  Assemble one half of the roof using 11x Swaged Tubes (2), 3x Rafter Tubes (3), 

4x Straight Cross Tubes (4), 4x 3-Way Connectors (5), and 2x 4-Way Connectors (6).

Align the 3- and 4-Way Connectors so that the free ends are all on the 

same side of the assembly, as shown in Figure 1.

Figure 2:  Roof Assembly - 2

5 2

4

2

6

2

4

2

5

5

6

5

3

3

3

2

2

2

2.  Connect a Swaged Tube (2) to each 3- and 4-Way Connector (5,6) at the top of the roof.

Connect a Rafter Tube (3) to the end of each Swaged Tube (2).

Connect 4x Swaged Tubes (2), 2x Straight Cross Tubes (4), 2x 3-Way Connectors (5), and 

1x 4-Way Connector (6) together, then attach that assembly to the ends of the Rafter Tubes (3).

SAFETY

MAINTENANCE

ASSEMBL

Y

Also See for Harbor Freight Tools 10 Ft. x 20 Ft. Portable Car Canopy

0.612049s