Harbor Freight Tools 10 ft. x 17 ft. Portable Garage Product manual | Page 7

Page 7

For technical questions, please call 1-800-444-3353.

Item 60727        

attach Front and Back Covers
1.  Position the Front Cover (25) so that the zippers 

face outside and the warning label faces inside.

Front 

Cover (25)

Figure G

2.  From the inside, remove the Ridge 

Rail from the 3-Way Connector.  

3.  Place the strap over the 3-Way Ridge Connector, 

then reattach the Ridge Rail. 

4.  Tighten the strap, by pulling on the ends, so 

that the flaps wrap around the frame.

 9

05_60727_A0

Ridge Rail

Flaps

Strap

3-Way 

Connector

Figure h

5.  Remove the Top Rail from the 

Stabilizer on the left side.

6.  Place the strap over the Stabilizer, 

then reattach the Top Rail.

7.  Tighten the strap, by pulling on these ends, 

so that the flaps wrap around the frame.

8.  Repeat steps above on the right side.

top Rail

Stabilizer

Flaps

Strap

Figure i

9.  Attach the Back Cover (26) in the same manner.

10. From the inside, secure Front and Back Covers 

to the Corner Legs with Ratchets (27):
a.  Insert the Ratchet’s S-Hook through the 

hole on the side of the Corner Leg.

b.  Thread the strap through the Ratchet 

spindle, then pull up on the strap.

c.  Raise and lower the Ratchet 

handle to tighten the strap.

d.  Repeat for the other corners.

note:  To avoid damaging the straps, 

do not overtighten the Ratchets.  

Ratchet

Corner 

leg

Strap

handle

Spindle

S-hook

Figure j

Sa

FE

tY

m

aint

Enan

CE

aSSE

m

B

lY