Harbor Freight Tools 1_1/2 in. Capacity 14 Amp Chipper Shredder Product manual | Page 4
Page 4
Item 69293
For technical questions, please call 1-888-866-5797.
13. Maintain Appliance With Care - Keep cutting edge
sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating
and changing accessories. Inspect appliance cord
periodically, and if damaged, have it repaired by
an authorized service facility. Inspect extension
cords periodically and replace if damaged. Keep
handles dry, clean, and free from oil and grease.
14. Check Damaged Parts - Before further use of the
appliance, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other condition that may affect its operation. A guard
or other part that is damaged should be properly
repaired or replaced by a qualified technician
unless indicated elsewhere in this manual.
15.
Disconnect Appliance - Disconnect the
appliance from the power supply when not
in use, before servicing, when changing
accessories such as blades, and the like.
16.
Keep guards in place and in working order.
17.
Keep blades sharp.
18.
Keep clear of intake and discharge chute.
Use included push stick. Unplug unit and
allow it to stop before unclogging.
General Safety
1. Do not use appliance for other than intended use.
2. Maintain labels and nameplates on the appliance.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
3. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
SAFETY
OPERA
TION
MAINTENANCE
SETUP
Related Manuals for Harbor Freight Tools 1_1/2 in. Capacity 14 Amp Chipper Shredder
-
Harbor Freight Tools Power Tools 20 ton Log Splitter Product manual
32 pages
-
Harbor Freight Tools Power Tools 3_In_1 Electric Blower Vacuum Mulcher Product manual
24 pages
-
Harbor Freight Tools Power Tools 22 in. Electric Hedge Trimmer Product manual
12 pages
-
Harbor Freight Tools Power Tools 13 in. Electric String Trimmer Product manual
16 pages
-
Harbor Freight Tools Power Tools 212cc Chipper Shredder Product manual
28 pages
-
Harbor Freight Tools Power Tools 14 in. Electric Chain Saw Product manual
24 pages
-
Harbor Freight Tools Power Tools 5 ton Log Splitter Product manual
16 pages
-
Harbor Freight Tools Power Tools 1.5 HP Gasoline Auger Powerhead with 4 in. Bit Product manual
24 pages
-
Harbor Freight Tools Power Tools Saw Mill with 280cc Gas Engine Product manual
40 pages
-
Harbor Freight Tools Power Tools 42cc 18 in. Gas Chain Saw Product manual
19 pages
-
Harbor Freight Tools Power Tools 10 Ton Hydraulic Log Splitter Product manual
12 pages
-
Harbor Freight Tools Power Tools Chain Saw Chain_Breaker/Spinner Product manual
8 pages