Hamilton Beach 4161 User's Manual | Page 6

Hamilton Beach Air Cleaner User's Manual - 4161.
Download
Page  of 48
4.7, 2084 votes
background image

6

NOTE: The carbon pre-filter should be
replaced approximately every three
months. 

Remove the intake grille by carefully
pulling the upper two side tabs away
from the body of the air purifier and 
lifting up.

Unfold and flatten out the black 
carbon pre-filter. Attach the four 
corners of the carbon pre-filter 
to the four hook fasteners on the 
HEPA filter.

Locate the black carbon pre-filter. 
It will be folded inside a plastic bag.
Remove and discard the plastic bag.

Installing the Carbon Pre-Filter

Insert the two tabs on the bottom of
the intake grille into the holes on the
bottom ledge of the air purifier. 
Pivot the intake grille into place and
lightly press on the upper corners of
the grille to snap it into place.

NOTE: The air purifier has a safety
switch that prevents operation if the
intake grille is not properly installed.
DO NOT attempt to override or 
disable this safety switch.

1

2

3

4

840129900 ENv02.qxd  11/1/04  11:01 AM  Page 6

0.572683s