Graco 406902B - Glazing Nozzle Kits Finex Mini User's Manual

Graco Sprayers User's Manual - 406902B - Glazing Nozzle Kits Finex Mini.
Download
Page  of 1
4.4, 2214 votes
background image

GENUINE GRACO PARTS AND ACCESSORIES

Glazing Nozzle Kits
Finex™ Mini Gravity Feed Guns (1 mm Nozzles)

406902B

ENG

Kit 24F733

Kit 24F734

Installation

1.

Remove air cap (A), nozzle (B), and air distributor 
(C) from Mini-Finex gun.

2.

Turn fluid control knob (D) counterclockwise until 
fully open. Screw glazing nozzle (101) into gun and 
tighten.

3.

If air cap is to be used, install o-ring (103) in air cap 
(102). Tighten air cap onto gun. Be sure to fully seat 
the air cap on the gun so the o-ring will form to the 
gun body.

Operation

Kit 24F733 only: Gun will function as a gravity feed dis-
penser.

Kit 24F733 + Kit 24F734: Addition of the air cap causes 
gun to spatter the fluid for more area coverage. Use only 
as much air pressure as needed. Do not exceed 30 psi 
at the gun inlet. Excessive air pressure will cause signifi-
cant overspray and material waste.

Important Safety Instructions
Read all warnings and instructions in manual 
312388. Save all instructions.

Ref. Description

Qty.

101 NOZZLE, glazing

1

Ref. Description

Qty.

102 AIR CAP, for glazing nozzle

1

103 O-RING

1

A

B

C

ti16209a

101

ti16210a

D

102

103

ti16211a

ti16212a

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Original instructions. This manual contains English. MM 406902
Copyright 2010, Graco Inc. is registered to ISO 9001
Revised 12-2010

Related Manuals for Graco 406902B - Glazing Nozzle Kits Finex Mini

0.603749s