GN Netcom Netcom GN 9330 Owner's Manual | Page 7

GN Netcom Network Card Owner's Manual - Netcom GN 9330.
Download
Page  of 19
4.6, 2078 votes
background image

3.   Make a call to someone who will act as a test person.
4.    Use 

56 to scroll through 12-setting transmit volume menu   until your test person 

confi rms your voice is at the appropriate volume.

5.   Press OK to confi rm new setting.

The transmit volume menu is the permanent default/start position for the LCD display. After 
adjusting any of the other settings via the display, it will revert to the transmit volume menu 
position.

 

 Important: For USB applications, the volume settings are fi xed and need no adjustment.

 2.5.2 

Hookswitch 

selection 

The GN 9350 enables you to answer and end calls remotely by using the GN 1000 RHL, or its 
built-in electronic hookswitch (EHS) modes. EHS is only possible on certain telephone sys-
tems. In order to determine which telephones have the EHS feature enabled, please refer to our 
website www.gnnetcom.com/gn9120/ehs-setup. Please also refer to your telephone´s user 
manual for clarifi cation.

4 modes are available

GN RHL

non-EHS; works with the GN 1000 RHL

DHSG

e.g. Siemens and Elmeg desk telephones

AEI

e.g. with Tenovis desk telephones

MSH

e.g. with Alcatel desk telephones

 

 Note: By default, the GN 9350 is set to the RHL interface, which also is 

the correct setting if you manually operate your handset when answer-
ing/ending calls as described in the Guide for basic set-up and use.

To select the appropriate interface:
1.    Use 

34 to locate the hookswitch selection menu   

 on 

base 

display.

2.   Use 

56 to select one of the 4 interfaces from the menu.

3.   Press OK to confi rm the interface.

 

 Note: To use the DHSG, AEI or MSH function, connect the connec-
tion cord (accessory) to your desk telephone and the AUX port of 
the GN 9350. 

  2.5.3 Range/power selection

Your headset offers 3 range/power modes (Normal, Low and Very Low). The Normal mode 

6

 

0.500628s