GN Netcom Netcom GN 9330 Owner's Manual | Page 6

GN Netcom Network Card Owner's Manual - Netcom GN 9330.
Download
Page  of 19
4.6, 2078 votes
background image

GN 9350   GN 9330   GN 9330 USB

2.4   Connecting to external Online Indicator (OLI) (GN Netcom accessory)

An external online indicator (accessory) can be placed on your desk or near your telephone to 
indicate when you’re on a call.

To connect to an external OLI: Plug cord from OLI to base’s OLI port.

GN 9350   GN 9330   GN 9330 USB

2.5   LCD display

Your base unit has a LCD display and display control with which you control 5 settings:

  Transmit volume setting
 Hookswitch selection
 Range/power selection
  Sound mode selection
  Protection level selection (IntelliTone®)

 

Navigation and markers
Navigate through the LCD display’s 5 menus horizontally using the display control’s

34 ar-

rows. Within each of the 5 menus, navigate vertically with the display control’s

56arrows.

Press the OK button to confi rm a specifi c choice/value within the 5 different menus. A star (*) 
beside a selected choice/value indicates the current setting.

 Default/start 

position

The LCD display is always on and ready to use. The permanent default/start position for the 
LCD display is the leftmost transmit volume setting 

. The LCD display will always revert to 

this default/start position, if not operated for 30 seconds.

Within each of the 5 menus, there is also a factory-set default. This default remains until you 
change it. The last selected choice/value (within each of the 5 menus) is always displayed in 
the fi rst line of its menu.

Changing the settings

  2.5.1 Transmit volume 

The transmit volume must be adjusted properly so your voice is heard clearly. 
If you haven’t already adjusted the transmit volume during your initial setting up, do so now 
by completing the following:
1.   Put on headset.
2.   Use 

34 to locate transmit volume menu    on base display.

5

 

0.515571s