GIGABYTE Cyclops Owner's Manual

GIGABYTE PC Components Owner's Manual - Cyclops.
Download
Page  of 1
4.6, 2326 votes
background image

The fol owing are not covered by the warranty : 

1. Use the product incorrectly or in a manner other than the designed 

purpose.

2. Nonobservance of the proper operation provided. (e.g. over-clocking)

3. Malfunction due to interference from other devices.

4. Fail to install due to the specification of the VGA card or other 

components that are not supported by the product.

5. Unauthorized modification of the product.

6. Malfunction arising from casualties (earthquake, thunder, fire, and 

flood).

7. The warranty label of the product has been removed or damaged.

8. Any loss caused by removing the original heat sink on VGA card.

9. Any loss caused by failure to fol ow the instal ation process contained 

in the user. 

GH-UDUE21-FC

Caution

Features
1.
Supports  nVIDIA SLi and ATi CrossFire.

2.High Performance – Aluminum fin with copper 

pil ar and base to advance thermal circulation.

3.Radial airflow – 8 cm fan with radial airflow to 

enhance thermal circulation of surrounding 

components.

4.Light weight – Only 200g, VGA card loading free.

5.Two covers in red and green– Users may use the 

cover depend on their preference.

6.Ball bearing fan with 2300 rpm – provides quiet 

and long life expectancy and reliability.

7.Heat sink for memory.
8.Easy and fast instal ation.

Specification
Heat Sink Dimension : 160 x 91 x 34 mm
Fan Dimension : 80 x 80 x 15 mm
Base material : Copper
Fin material : Aluminum
Rated Voltage : 12 V
Rated Current : 0.19 Amp
Fan Speed : 2300 rpm
Noise : 25 dBA
Bearing Type : EBR Bearing

Fan Life Expectancy : 30,000 hr

 

Support :
nVIDIA 6600 PCI-E series
nVIDIA 7600 PCI-E serie
ATi RADEON X1650 series
ATi RADEON X700 series
ATi RADEON X1600 series
ATi RADEON X1300 series 
ATi RADEON X800 series

Accessories

2) Wrench x 1

3) Heat Sink x 8  

4) Washer x 4

5) Nut x 4

6) Screw x 4

7) Grease x 1  

BracketInstruction

GeForce 6600 LE
GeForce 6600
GeForce 6600 GT
GeForce 7300 GS
GeForce 7600 GS
GeForce 7600 GT

nVIDIA

ATi

AGP

PCI-E

RADEON X800 XL
RADEON X800 GTO
RADEON X800
RADEON X800 XT
RADEON X800 Pro
RADEON X700 XT
RADEON X700 Pro
RADEON X700

RADEON X800 XL
RADEON X800
RADEON X800 XT
RADEON X800 Pro

AGP

PCI-E

nVIDIA

ATi

nVIDIA

ATi

nVIDIA

ATi

TYPE A

TYPE B

InstallationInstruction ( ATi and nVIDIA )

Remove the original cooler on the VGA card and clean the grease.  
( as Figure A )

According to the
number of the 

memories on the VGA card, to remove 
the sticker on the back of the heat 
sinks and paste on the memories.  
( as Figure B )

                            To replace the 

                            cover, use the pincer 

compress the col apsible end of the push 

clips to slide out to remove the original 

cover and put on the new one by aligning 

the push clips with the lock holes on the 

cooler and pushed completely through 

the holes to lock it. ( as Figure D )

Lock the screws

on the bracket 

with wrench. ( as Figure F )

To complete

the instal ation, 

connect the power cord of the fan 

to the output of the power supply. 

( as Figure I )

Apply the

grease on 

the VGA chip appropriately.  
( as Figure C )

Tear off the

sticker on 

the copper base. ( as Figure E )

Place the

cooler on the 

table and align the holes for 

the screws on the VGA card to 

the screws on the cooler.  
( as Figure G )

STEP

1

Remove heat sinks on the memories if any.

To  avoid  the  damage  to  the 

chip,  please  lock  the  nuts 

diagonal y.

Place the washers on 

the screws and lock the 

nuts on the screws with screwdriver to 

fasten the cooler.  

(as Figure H)

 Figure B

 Figure D

 Figure F

 Figure H

 Figure A

 Figure C

 Figure E

 Figure G

 Figure I

STEP

2

STEP

4

STEP

6

STEP

8

STEP

3

STEP

5

STEP

7

STEP

9

Caution:Please be careful while removing the original heat sink on the VGA card. GIGABYTE 

is not responsible to any loss caused during the removing process.

Please lock the screws on the 

appropriate positions.  

1) Cover ( red ) x 1

W h i l e   i n s t a l l i n g   t h e 

power  cord  of  the  fan, 

please be careful not to 

interfere to the blade. 

InstallationGuide

RADEON X1650 XT
RADEON X1650 Pro
RADEON X1600 XT
RADEON X1600 Pro
RADEON X1300 Pro
RADEON X1300

Related Manuals for GIGABYTE Cyclops

0.529232s