GIGABYTE AGP 4X(1.5V) User's Manual

GIGABYTE Computer Hardware User's Manual - AGP 4X(1.5V).
Download
Page  of 112
4.8, 1117 votes
background image

When you installing AGP card, please make sure the following

notice is fully understood and practiced. If your AGP card has

"AGP 4X(1.5V) notch"(show below), please make sure your AGP

card is AGP 4X(1.5V).

Caution: AGP 2X(3.3V) card is not supported by Intel®

 845(GE/PE) /

845(E/G) / 850(E). You might experience system unable to boot up
normally. Please insert an AGP 4X(1.5V) card

Example 1: Diamond Vipper V770 golden finger is compatible with
2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X
(1.5V) mode by adjusting the jumper. The factory default for this card is
2X(3.3V).
The GA-8PE667 Ultra2 / GA-8PE667 Pro(or any AGP 4X only)
motherboards might not function properly, if you install this card without
switching the jumper to 4X(1.5) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by
"Power Color", the graphics card manufacturer & some SiS 305 cards,
their golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot,
but they support 2X(3.3V) only. The GA-8PE667 Ultra2 / GA-8PE667 Pro
(or any AGP 4X only) motherboards might not function properly, If you
install this card in it.

Note : Although Gigabyte's AG32S(G) graphics card is based on
ATi Rage 128 Pro chip, the design of AG32S(G) is compliance
with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work
fine with  Intel®845(GE/PE) /845(E/G) / 850(E) based motherboards.

Before you install PCI cards, please remove the Dual BIOS
label from PCI slots if there is one.

Related Manuals for GIGABYTE AGP 4X(1.5V)

0.500992s