GE PT925SNSS Quick Start Manual

GE Ovens Quick Start Manual - PT925SNSS.
Download
Page  of 28
4.7, 1137 votes
background image

1

Single Double Wall Oven

 

Installation 

Instructions

Before You Begin
Read these instructions carefully and completely.

• 

IMPORTANT—Save these

  instructions for local inspector’s use.

• 

IMPORTANT—Observe all

  governing codes and ordinances.
• Note to Installer—Be sure to leave these
  instructions with the consumer.
• Note to Consumer—Keep these
  instructions for future reference.

• Proper installation is the responsibility of the 

installer and product failure due to improper 
installation is NOT covered under warranty.

• NOTE—This appliance must be properly 

grounded.

• 

ATTENTION INSTALLER

  All electric wall ovens must be hard wired 

(direct wired) into an approved junction box. 
A plug and receptacle is NOT permitted on 
these products.

Tools Needed

1/8” (3 mm) Drill Bit and 
Electric or Hand Drill 

Nut Driver 7/16” 

(11 mm)

Materials Needed

Strain Relief Clamp for 

1/2” conduit

Junction Box

Wire Nuts

String 72” 

(183 cm) 

31-10696      07-08 JR

Parts Included

(Appearance will vary)

Screws For Installation 
(8-18 x .625 Black Dome 
Phillips Head)

 Lower Oven 

Rack Supports 

with Hex Nuts 

PT925

30” (76.2 cm) 
Metal Bottom Trim Assembly

 Hex Nuts

If you have questions, call 1.800.GE.CARES or visit our website at: ge.com

Wire Strippers

Phillips #2  

Screwdriver

0.492082s