GE PROFILE PD900DP User's Manual
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
PD900DP
GE Profile™ 30" Drop-In Electric Range
Note: Cabinets instal ed adjacent to slide-in ranges must have an
adhesion spec of at least 194° temperature rating.
Note: To reduce possibility of scorching the side wal s above the
countertop when no load is present on burners, it is recommended
that a minimum of 6" spacing from adjacent side wall be allowed for
possible extended, high-heat, element operation.
IMPORTANT: 30" DROP-IN RANGES ARE DESIGNED TO HANG
FROM THE COUNTERTOP. IT DOES NOT REST ON THE FLOOR.
FOR INSTALLATION ALTERNATIVES, REFER TO INSTALLATION
INSTRUCTIONS PACKED WITH PRODUCT.
Optional Kits For Drop-In Electric Ranges (Available At Additional Cost)
Instal ation information: Before instal ing, consult instal ation
instructions packed with product for current dimensional data.
Accessory Backguards
(Attaches to the back of range
as a backguard when unit is instal ed
in 30" free-standing cutout)
JXS32SS (Stainless) - 4" High
JXS32WW (White) - 4" High
JXS32BB (Black) - 4" High
JXS37WW (White) - 5-1/4" High
JXS37CC (Bisque) - 5-1/4" High
JXS37BB (Black) - 5-1/4" High
Rear Filler Strip
WB07T10680 - Black Fil er Strip Assembly
WB07T10681 - White Fil er Strip Assembly
WB07T10682 - Bisque Fil er Strip Assembly
Specification Created 5/09
220804
Al GE ranges are equipped with
an Anti-Tip device. The instal ation
of this device is an important,
required step in the instal ation
of the range.
Listed by
Underwriters
Laboratories
Dimensions and Instal ation Information (in inches)
KW Rating
240V 11.6
208V 8.7
Breaker Size
240V 40 Amps
208V 40 Amps
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
6" Min.
from walls
7-1/2
2-7/8"
To Front Surface
of Countertop
30
36
27-1/2
25
23-3/16
If necessary,
build upsides
to 1-1/4" thick
to provide
countertop
support
27
20-5/8" Door
Clearance
From Front
Surface of
Countertop
24
31-1/4
30
A/B*
Accessory
Backguard
26-1/2**
*JXS37 is 5-1/4" and JXS32 is 4"
(excluding handle)
**Total depth from wal to
front of closed oven door
including handle is 29-1/2.
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
6" Min.
from walls
7-1/2
2-7/8"
To Front Surface
of Countertop
30
36
27-1/2
25
23-3/16
If necessary,
build upsides
to 1-1/4" thick
to provide
countertop
support
27
20-5/8" Door
Clearance
From Front
Surface of
Countertop
24
31-1/4
30
A/B*
Accessory
Backguard
26-1/2**
*JXS37 is 5-1/4" and JXS32 is 4"
(excluding handle)
**Total depth from wal to
front of closed oven door
including handle is 29-1/2.
Related Manuals for GE PROFILE PD900DP
-
Lincoln welder MIG 140C User's Manual
1 pages
-
Lincoln welder MIG 180C User's Manual
1 pages
-
Lincoln welder SP-135T User's Manual
1 pages
-
Chicago Electric welder 40388 User's Manual
17 pages
-
Chicago Electric welder MIG 170 User's Manual
32 pages
-
Chicago Electric welder 95136 User's Manual
24 pages
-
Campbell Hausfeld welder WIRE FEED WF2000 User's Manual
40 pages
-
Miller Electric welder 602 User's Manual
40 pages
-
Miller Electric welder Auto-Axcess 450 User's Manual
68 pages
-
Miller Electric welder Maxstar 200 STR User's Manual
56 pages
-
Miller Electric welder R-115 User's Manual
36 pages
-
Miller Electric welder S-22P12 User's Manual
28 pages
-
Miller Electric welder SRH-444 User's Manual
2 pages
-
Miller Electric welder SSW-2020 ATT User's Manual
4 pages
-
Miller Electric welder Thunderbolt XL AC/DC User's Manual
2 pages
-
Miller Electric welder XMT 350 CC/CV User's Manual
40 pages
-
Miller Electric welder XMT 400 User's Manual
36 pages
-
Miller Electric welder XMT 456 CC User's Manual
44 pages
-
Miller Electric welder XR Control User's Manual
72 pages
-
Tektronix welder Welder 2467B User's Manual
194 pages
-
Lincoln Electric welder AC-225 User's Manual
2 pages
-
Lincoln Electric welder NA-3N User's Manual
8 pages
-
Lincoln Electric welder RANGER 250 GXT User's Manual
36 pages
-
Miller Electric welder XMT 304 CC/CV Owner's Manual
40 pages