GE JVM1850 Specifications | Page 2

GE Microwave Oven Specifications - JVM1850.
Download
Page  of 3
4.8, 1556 votes
background image

GE Appliances

JVM1850BH/CH/SH/WH – GE Spacemaker® Over-the-Range Microwave Oven 

Specification Created 10/03
340105

R

Listed by
Underwriters
Laboratories

For answers to your Monogram,® GE Profile™ or 
GE® appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center® service, 800.626.2000.

Optional Accessories (Available at additional cost)

HOOD EXHAUST DUCT: Outside ventilation requires a HOOD EXHAUST DUCT. Read the following carefully.

EXHAUST CONNECTION: The hood exhaust has been designed to mate with a standard 3-1/4" x 10" 
rectangular duct. If a round duct is required, a rectangular-to-round transition adaptor must be used.
Do not use less than a 6” diameter duct

REAR EXHAUST: If a rear or horizontal exhaust is to be used, care should be taken to align exhaust with space
between studs, or wall should be prepared at the time it is constructed by leaving enough space between the
wall studs to accommodate exhaust.

MAXIMUM DUCT LENGTH: For satisfactory air movement, the total  duct length of 3-1/4" x 10" rectangular or
6" diameter round duct should not exceed 140 equivalent feet.

ELBOWS, TRANSITIONS,WALL AND ROOF CAPS, etc., present additional resistance to airflow and are
equivalent to a section of straight duct which is longer than their actual physical size. When calculating the total
duct length, add the equivalent length of all transitions and adaptors plus the lengths of all straight duct sections.
The chart below shows the approximate feet of equivalent length of some typical ducts.

Duct

Equivalent Feet

A. Rectangular-To-round

5 ft.

Transition Adaptor

B. Wall Cap

40 ft.

C. 90° Elbow

10 ft.

D. 45° Elbow

5 ft.

E. 90° Elbow

25 ft.

F. 45° Elbow

5 ft.

G. Roof Cap

24 ft.

Filter Kits

JX81B–Recirculating
Charcoal Filter Kit

To be used when the
Spacemaker microwave
oven cannot be vented 
to the outside.

Filler Panel Kits
JX52WH–White
JX52BL–Black

When replacing a  36" or 42" 
range hood, this kit fills in the 
additional width to provide a 
custom built-in appearance. 
For installation between
cabinets only; not for
end-of-cabinet installation. 
Each kit contains two 3"-wide
filler panels. 

 

Related Manuals for GE JVM1850

0.559156s