GE GE PROFILE JGSP48SH User's Manual

GE TV Cables User's Manual - GE PROFILE JGSP48SH.
Download
Page  of 2
4.9, 1592 votes
background image

TM

Specification Created 4/04
230126

JGSP48SH – GE Profile™ 30" Slide-In Gas Range

Dimensions (in inches) and Installation Information 

For answers to your Monogram,® GE Profile™ or  

GE appliance questions, visit our website at 

GEAppliances.com or cal   

GE Answer Center® service, 800.626.2000.

30_profile_gas_slide_in.eps

2-7/8" 

To Front  

Surface Of  

Countertop

20-5/8" 

Door Clearance

From Front  

Surface of  

Countertop

31-1/4

30

27-1/2

44-3/4

4

Accessory 

Backguard

36

2" 

(Grates)

24

Acceptable 

Gas Line & 

Electrical 

Outlet Area

Max. depth of 

cord, plug,

receptacle box

& gas hookup

3-1/2 to prevent

interference   

with drawer

30 Min.

30 Min.

Shave Raised Edge To Clear

31-1/8 Wide Control Panel

gas_slide_in_install.eps

36

4 Min.

From Walls

23-3/16

18 Min.

13 Max.

3

29-15/16 Min.

30-1/16 Max.

25

9/16

7

12

15

Counter Cutout Dimensions (in inches) 

28-1/4*

36

Maintain 

at least 6" 

from nearest 

combustible 

surface.

Acceptable

Electrical

Outlet Area

30" Slide-In Range 

Dimensions (in inches)

45-1/8

2-1/4

5

6

4-1/2

30

30 Min.

15 Min.

6

30" Slide-in Elec. Range 

Aug. 8, 2003 -km

23-3/16

30

30

If you are NOT using the

optional Filler or Backguard:

If you are using the

optional Filler or Backguard:

25

*Wall to front of 

 closed door handle 

 on model JSP34.

 28" on models 

 JSP26/JSS26/16.

Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 

below countertop if the range side trims above the countertop extend beyond the cabinet 

fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 

combustible surface.    

30

30-3/4

28-1/4*

36

Maintain 

at least 6" 

from nearest 

combustible 

surface.

Acceptable

Electrical

Outlet Area

30" Slide-In Range 

Dimensions (in inches)

45-1/8

2-1/4

5

6

4-1/2

30

30 Min.

15 Min.

6

30" Slide-in Elec. Range 

Aug. 8, 2003 -km

23-3/16

30

30

If you are NOT using the

optional Filler or Backguard:

If you are using the

optional Filler or Backguard:

25

*Wall to front of 

 closed door handle 

 on model JSP34.

 28" on models 

 JSP26/JSS26/16.

Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 

below countertop if the range side trims above the countertop extend beyond the cabinet 

fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 

combustible surface.    

30

30-3/4

You must use the rear filler strip kit shipped with the 

range or the optional accessory backguard (JXS31, 

JXS32, JXS33, JXS34) when instal ing these ranges.
Note: Cabinets instal ed adjacent to slide-in ranges 

must have an adhesion spec of at least 194°F 

temperature rating.
Optional Kits for Slide-In Gas Ranges:  

(Available at additional cost)
Lower/Side Trim Kits
JXS52BB—Lower Trim Kit (Black) 

JXS53WW—Lower Trim Kit (White) 

JXS55CC—Lower Trim Kit (Bisque)
Accessory Backguards
JXS31—White Accessory Backguard 

JXS32— Brushed-Chrome Accessory Backguard

JXS34—Black Accessory Backguard 

JXS35—Bisque Accessory Backguard
Endcap Kit
JXS40—Endcap kit to accommodate replacement 

where countertop may already be notched.

Installation Information: Before instal ing, consult 

instal ation instructions packed with product for 

current dimensional data.

Al  GE ranges are equipped with 

an Anti-Tip device. The instal ation 

of this device is an important, 

required step in the instal ation 

of the range.

0.609087s