GE CGS980 User's Manual | Page 15

GE Range User's Manual - CGS980.
Download
Page  of 60
4.8, 1746 votes
background image

Consumer Support

Installation Instructions

Tr

oubleshooting T

ips

Operating Instructions

Safety Instructions

15

Not all features are on all models.

To Set the Clock

The clock must be set to the correct time of
day for the automatic oven timing functions
to work properly. The time of day cannot
be changed during a timed baking or self-
cleaning cycle.

Touch the CLOCK pad to set. 

Touch the number pads.

Touch the number pads the same way you
read them. For example, to set 12:34, touch
the number pads 1, 2, 3 and in that order.

If number pads are not touched within one
minute after you touch the CLOCK pad, the
display reverts to the original setting. If this
happens, touch the CLOCK pad and reenter
the time of day.

Touch the START pad until the time 
of day shows in the display. This 
enters the time and starts the clock.

To check the time of day when the display is
showing other information, simply touch the CLOCK
pad. The time of day shows until another pad is
touched.

To Set the Timer

The timer does not control oven operations. 
The maximum setting on the timer is 9 hours 
and 59 minutes.

Touch the KITCHEN TIMER ON/OFF pad.

Touch the number pads until the
amount of time you want shows in the
display. The maximum time that can
be entered in minutes is 59. Times
more than 59 minutes should be
changed to hours and minutes. For
example, to enter 90 minutes as 1
hour 30 minutes, touch 1, 3 and 0 in
that order.

If you make a mistake, press the KITCHEN TIMER
ON/OFF 
pad and begin again.

Touch the START pad. After pressing
the START pad, SET disappears; this
tells you the time is counting down,
although the display does not change
until one minute has passed.

When the timer reaches :00, the
control will beep 3 times followed 
by one beep every 6 seconds until 
the KITCHEN TIMER ON/OFF pad is
touched.

The 6 second tone can be canceled by following 
the steps in the Special features of your oven control
section under Tones at the End of 
a Timed Cycle.

Using the clock and timer.

ge.com

Make sure the clock is set to the
correct time of day.

The timer is a minute timer only. 

The CLEAR/OFF pad does not affect
the timer.

0.566581s