GE Built-In Wall Oven JCTP70 User's Manual

GE Ovens User's Manual - Built-In Wall Oven JCTP70.
Download
Page  of 28
4.4, 2321 votes
background image

1

If you have questions, call 1.800.561.3344 or visit our website at:
www.geappliances.ca

Built-In Wall Oven
27
 (68.6 cm) models

Installation
Instructions

JCKS10, JCKP30, JCKP70, PCK916, PCK920

Materials Needed

Strain Relief Clamp
for 1/2” conduit

Junction
Box

Wire Nuts

91 cm (36”) of String

Before You Begin
Read these instructions carefully and completely.

IMPORTANT—Save these
instructions for local inspector’s use.

IMPORTANT—Observe all
governing codes and ordinances.

• Note to Installer—Be sure to leave these

instructions with the consumer.

• Note to Consumer—Keep these

instructions for future reference.

• Proper installation is the responsibility

of the installer and product failure due
to improper installation is NOT covered
under warranty.

• NOTE—This appliance must be properly

grounded.

ATTENTION INSTALLER
All electric wall ovens must be hard wired
(direct wired) into an approved junction
box. A plug and receptacle is NOT permitted
on these products.

31-10666-3       11-07 JR

Tools Needed

1/8” (3 mm) Drill Bit and
Electric or Hand Drill

Phillips
Screwdriver

Parts Included
(Appearance will vary.)

Screws for Installation
(8-18 x .750 flat head
Phillips wood screws)

30 (76.2 cm) models
JCTP30, JCTP70, PCT916, PCT920

76.2 cm (30

″)

Metal Bottom Trim
Assembly

68.6 cm (27

″)

Metal Bottom Trim

WB07T10578 – Black
WB07T10579 – SS
Optional 68.6 cm (27

″)

Metal Bottom Trim Assembly
(on some models or can be
purchased separately)

0.546934s