GE BoxTimer Replacement Module (15600, 15601, 15306, 15307) Owner's Manual

GE Timers Owner's Manual - BoxTimer Replacement Module (15600, 15601, 15306, 15307).
Download
Page  of 1
4.4, 1471 votes
background image

Using the ADAPteR to instAll A MeChAniCAl tiMeR 

to An inteRMAtiC enClosURe

STEP 1 

The original insulator that came with the timer must 

be replaced by the insulator provided with the 

adapter kit. For smaller metal enclosure, cut along 

the horizontal line (1 1/4”) from bottom of the 

insulator provided with the adapter kit. For all other 

enclosures, install the unmodified insulator.

STEP 2

Attach the adapter to the mechanical timer.

Lift the motor wires and carefully insert the plate 

between the wires and the timer. Using the short 

screws, attach the adapter.

Using a flat-blade screwdriver, carefully tighten the 

screws to secure the timer to the adapter.

When correctly attached, the raised edge of the 

adapter should be on the LEFT side of the mechani-

cal timer when viewed from the rear.

STEP 3

Slide the timer on an angle inside of the enclosure, 

gently resting it against the clip.

STEP 4

With the top of the adapter resting on the clip, push 

the top of the timer down until it snaps and locks.

Jasco Products Company LLC

10 E. Memorial Road

Oklahoma City, OK 73114.

VISIT:

www.jascoproducts.com/timer

FOR TECHNICAL HELP

CALL 1-800-654-8483

OPTION 4

Related Manuals for GE BoxTimer Replacement Module (15600, 15601, 15306, 15307)

0.499209s