GE BedroomPhone 00004548 User's Manual | Page 2

GE Telephone User's Manual - BedroomPhone 00004548.
Download
Page  of 2
4.2, 2085 votes
background image

Alarm Operation
The 29297 is equipped with two alarms.  The alarms can be set 

independently to either radio or buzzer.
Setting the Alarm Time

1.  Press AlARM 1 or AlARM 2.
2.  Press the SET button.
3.  Use the CID 5or6 button to set the wake time. Press and hold 

for 3 seconds to quickly increase or decrease the time setting in 15 

minute increments.

4.  Press SET to confirm.
Set alarm tone

1.  Press the AlARM 1 or AlARM 2 button to review the setting.
2.  Press and release the desired AlARM button to choose radio,     

buzzer, or off.

3.  A music note icon on the display indicates that the alarm is set to radio, 

a bel  icon indicates that the alarm is set to buzzer.

Turning Off the Alarms

To turn off an alarm, press the AlARM OFF,  AlARM 1, or AlARM 2 

buttons. The alarm setting is retained and comes on the next day.
Snooze Timer 

After the wake mode is activated, you can silence it by pressing the 

snooze button.
You may use the snooze feature repeatedly. 
Setting the Snooze Timer

1.  Press and release the SET button.
2.  Press and release the snooze button. SNOOZE TIMER shows in 

the display.

3.  Press and release the CID 5or6 button to set the snooze time in 1 

minute increments or press and hold to scroll quickly. (The default  

is 9 minutes.)

4.  Press SET to confirm.
Using the Sleep Timer

Use the sleep timer to play the radio for a desired amount of time 

(increments of 15 minutes up to two hours), and then have it shut off 

automatical y. The default sleep time is 59 minutes.
1.  Press the SlEEP button repeatedly to select the desired sleep 

timer setting. Each press of the button will decrease the setting by 

15 minutes.

2.  The radio turns on automatically and the timer starts after you’ve 

selected the desired setting.

NOTE: To review the current sleep timer setting, press 

and release SLEEP.

3.  To cancel the sleep timer and turn the radio off, press snooze or 

RADIO ON/OFF.

Radio Operation
1.  Press and release the RADIO ON/OFF button to turn the radio on. 
2. Press the AM/FM button to the select the desired 

broadcast band.

3.  Rotate the tuning knob to select a radio station / frequency.
4.  Rotate the volume control wheel to adjust the listening level.
5.  To turn the radio off, press and release RADIO ON/OFF.

NOTE:  you can also turn on the radio after lifting up 

the handset by pressing the RADIO ON/OFF button.
NOTE:  The Radio broadcast will automatically turn 

off when you picked up the handset. Broadcast will 

resume when you replace the handset on cradle.

Built-in AFC

The built-in Automatic Frequency Control (AFC) works only on FM 

mode. It helps keep the radio locked onto the FM stations/frequencies.
FM stereo is a built in function.
AM Antenna

A built-in antenna eliminates the need for an outside antenna for AM 

reception. Moving the unit slightly may improve reception of distant 

AM signals.

FM Antenna

The power cord acts as your FM antenna. The power cord picks up 

moderate to strong signals and eliminates the need for an external 

antenna in most strong signal areas. be sure the power cord is 

stretched to its longest length. Do not coil or bunch the cord together. 

Changing position of the  power cord may improve reception.
Caller ID (CID)
Caller ID (CID) is a service available from your local telephone 

company. For Caller ID to work on this system, you must subscribe to 

Caller ID service.
This unit receives and displays information transmitted by your local 

phone company and can store up to 70 calls for later review.

VERy IMPORTANT: The Caller ID feature of this 

product requires a subscription to Caller ID service 

from your telephone company.

Summary Screen

The summary screen (display) shows the current time, current date 

and number of new calls to be reviewed. It is displayed until any 

button is pressed. Within 60 seconds of receiving a new call, the 

summary screen is displayed and the NEW CAll indicator comes on.

NOTE: Check with your local phone company 

regarding name service availability.

Receiving and Storing CID Records

When you receive a cal , the information is transmitted by the phone 

company to your Cal er ID telephone between the first and second ring. 

When memory is ful , a new cal  automatical y replaces the oldest call 

in memory. NEW appears in the display for cal s received that have not 

been reviewed.
Reviewing CID Records

As calls are received and stored, the display is updated to let you know 

how many calls have been received.
•  Press the CID 5or6 button to scrol  through the cal  records.
•  After all of the records are viewed, START/END appears in 

the display.  

Deleting CID Records

•  To delete the record showing in the display, press the DElETE 

button once.

•  To delete all records (while reviewing), press and hold the DElETE 

button. DELETE ALL? appears in the display. Press DElETE again 

to confirm.

Dialing Back

When reviewing CID records, you may dialback the number showing 

in the display by pressing the DIAl button. 
If you programmed your local area 

code in the set up menu

1.  Use the  CID 5or6 button to display the number you want  

to dial. 

•  If you see a number with 7 digits (i.e. 555-1234), then the call 

was received from within your area code. however, this does not 

guarantee the call is a local call.

•   If you see a number with 11 digits (i.e. 1-234-555-1234), then the 

call received was not from your area code.

2.  Press the DIAl button and the display shows PICKUP/ADJ. You have 

10 seconds to adjust the number and pick up the handset to dial, 

otherwise the unit returns to the currently reviewed call.

3.  To adjust the phone number, press the DIAl button. Press the DIAl 

button repeatedly to scroll through the 7, 10, and 11-digit numbers.

7-digits:   7-digit telephone number (i.e. 555-5555)

10-digits: 3-digit area code + 7-digit telephone number  

(i.e. 425-555-5555)

11-digits: long distance code 1 + 3-digit area code + 7-digit telephone 

number (i.e. 1-425-555-5555)

4.  To dial the displayed number, pick up the handset within 10 

seconds. NOW DIALING shows in the display and the number 

is dialed. 

If you did not program your local area 

code in the set up menu

1.  Use the CID 5or6 button to display the number you want to dial.

2.  See steps 2 through 4 in the above section to complete the 

dialback sequence.

NOTE: If the CID record has a 7-digit or 10-digit 

number, adjusting only adds “1” digit to the dialed 

number. Press the DIAL button repeatedly to scroll 

through the 11,10,7 digit sequence, otherwise no 

adjustment may be made and the number is dialed 

as received.

Message Indicators
The following messages show the status of the phone, provide Caller 

ID information, or help you set up and use your phone.
NO CALLS 

Indicates there is no record in memory.

UNKNOWN 

The incoming cal  is from an area not 

CAllER 

serviced by CID or CID information is not sent.

BLOCKED CALL 

Caller information is blocked from transmission.

ERROR 

Caller information has been interrupted during transmission.

NO DATA 

Caller information is interrupted during transmission or the phone 

is excessively noisy.

START/END 

Indicates you are at the beginning or the end of the call record  

log.

 

battery power is low.

Memory
The following buttons can be used as memory locations for storing 

data: 0-9 keys and memory buttons A, b, or C.
Storing a Number in Memory

1.  Pick up the handset.
2.  Press STORE.
3.  Enter the telephone number, up to 16 digits (the phone number will 

not be dialed in this mode). 

4.  Press STORE.
5.  Press the desired memory location button (0-9 or A, b, or C.)
6.  hang up the handset.

NOTE: If you make a mistake, hang up the handset 

and repeat the procedure for storing a number from 

the beginning.

Changing a Stored Number

Repeat the storage sequence in the Storing a Number in Memory 

section. The new number replaces the old number in the 

memory location.

NOTE: When the unit is first powered up, unwanted 

digits may be randomly created in memory locations.  

See Erasing a Stored Number to delete unwanted 

digits.

Erasing a Stored Number

1.  Pick up the handset.
2.  Press STORE.
3.  Press REDIAl.
4.  Press STORE again.
5.  Press the location (A, b, C, 0-9) to be erased.
Dialing a Number Stored in One-Touch  

Memory Location A, B or C

1.  Pick up the handset.
2.  Press the memory location button A, b, or C. The number in that 

memory location dials automatically.

Dialing Stored Numbers

1.  Pick up the handset.
2.  Press MEMORY.
3.  Press memory location 0-9. The number dials automatically.
Inserting a Pause in the Dialing  

Sequence

The REDIAl button becomes a pause function when the STORE 

button is pressed first. It is valid only when storing numbers into 

memory locations.
Use the REDIAl button to insert a pause when a delay is needed in 

an automatic dialing sequence. For example, when you must dial a 

9 to get an outside line or when you enter codes to access your long 

distance company.

Chain Dialing from Memory

Use this feature to make cal s which require a sequence of numbers, for 

instance if you use a cal ing card for a frequently cal ed long distance 

number. Each part of the sequence is dialed from memory. The fol owing 

example shows how you can use chain dialing to make a cal  through a 

long distance service:
The Number For  

 

 

Memory Location

long distance access number   

 

7

Authorization code   

 

 

8

Frequently called long distance number   

9

1.  Pick up the handset.
2.  Press the MEMORY button and then press 7.
3.  When you hear the access tone, press MEMORY and then press 8.
4.  At the next access tone, press MEMORY and then 9.
Troubleshooting Tips

Telephone Solutions

No Dial Tone
•  Check all cabling to make sure that all connections are secure and 

not damaged.

•  Check the hook switch: It should fully extend from the base when 

the handset is lifted from the cradle? 

Phone Does Not Ring
•  Make sure the ringer is turned on.
•  There may be too may extension phones connected to your line. Try 

disconnecting an extension phone.

•  See solution for ”NO DIAl TONE. ”
Incoming and Outgoing Voice Volume low

 

•   Are other phones off hook at same time? If so, this is normal 

condition as volume drops when additional phones are used at 

once.

Caller ID Solutions

No Information is Shown After the Phone Rings
•  To receive CID data, you must subscribe to Caller ID service from 

your telephone company.

•  Wait until the second ring before answering. CID data is received 

after the 1st ring.

Error Message is Displayed
•  ERROR

 appears in the display if the unit detects anything other 

than valid Caller ID information during the silent period after the 

first ring. This message indicates either the presence of noise on the 

line, or that an invalid message has been sent from the telephone 

company.

•  Wait until the second ring before answering.
General Product Care
To keep your unit working and looking good, follow these guidelines:
•  Avoid putting it near heating appliances and devices that generate 

electrical noise (for example, motors or fluorescent lamps).

•  DO NOT expose to direct sunlight or moisture.
•  Avoid dropping answerer and/or other rough treatment.
•  Clean with a soft cloth.
•  Never use a strong cleaning agent or abrasive powder because this 

will damage the finish.

•  Retain the original packaging in case you need to ship it at a 

later date.

Service
If trouble is experienced with this equipment, for repair or warranty 

information, please contact customer service at 

1-800-448-0329

If the equipment is causing harm to the telephone network, the 

telephone company may request that you disconnect the equipment 

until the problem is resolved.
This product may be serviced only by the manufacturer or its 

authorized service agents. Changes or modifications not expressly 

approved by Thomson Inc. could void the user’s authority to operate 

this product. For instructions on how to obtain service, refer to the 

warranty included in this guide or call customer service at

 

1-800-448-0329.

Or refer inquiries to: 

Thomson Inc. 

Manager, Consumer Relations 

P O box 1976 

Indianapolis, IN 46206
Attach your sales receipt to the booklet for future reference or jot 

down the date this product was purchased or received as a gift. This 

information will be valuable if service should be required during the 

warranty period.
Purchase date  ___________________________________________   

Name of store  ___________________________________________
Limited Warranty
What your warranty covers:

• Defects in materials or workmanship.

For how long after your purchase:

• One year, from date of purchase.
  (The warranty period for rental units begins with the first rental or 45 days 

from date of shipment to the rental firm, whichever comes first.)

What we will do:

• Provide you with a new or, at our option, a refurbished unit. The exchange 

unit is under warranty for the remainder of the original product’s warranty 

period.

How you get service:

• Properly pack your unit. Include any cables, etc., which were originally 

provided with the product. We recommend using the original carton and 

packing materials.

• ”Proof of purchase in the form of a bill of sale or receipted invoice which 

is evidence that the product is within the warranty period, must be 

presented to obtain warranty service.” For rental firms, proof of first rental 

is also required.  Also print your name and address and a description of 

the defect. Send via standard UPS or its equivalent to:

   

Thomson Inc. 

 

c/o Thomson 

 

11721 B Alameda Ave. 

 

Socorro, Texas 79927

• Pay any charges billed to you by the Exchange Center for service not 

covered by the warranty.

• Insure your shipment for loss or damage. Thomson Inc. accepts no liability 

in case of damage or loss.

• A new or refurbished unit will be shipped to you freight prepaid.

What your warranty does not cover:

• Customer instruction. (Your Owner’s Manual provides information 

regarding operating instructions and user controls. Any additional 

information, should be obtained from your dealer.)

• Installation and setup service adjustments.
• batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning damage.

Product Registration:

• Please complete and mail the Product Registration Card packed with your 

unit. It will make it easier to contact you should it ever be necessary. The 

return of the card is not required for warranty coverage.

Limitation of Warranty:

• The warranty stated above is the only warranty applicable to this 

product. All other warranties, express or implied (including all implied 

warranties of merchantability or fitness for a particular purpose) are 

hereby disclaimed. No verbal or written information given by ATLINKS 

USA, Inc., its agents, or employees shall create a guaranty or in any 

way increase the scope of this warranty.

• Repair or replacement as provided under this warranty is the exclusive 

remedy of the consumer. Thomson Inc. shall not be liable for incidental 

or consequential damages resulting from the use of this product 

or arising out of any breach of any express or implied warranty on 

this product. This disclaimer of warranties and limited warranty are 

governed by the laws of the state of Indiana. Except to the extent 

prohibited by applicable law, any implied warranty of merchantability 

or fitness for a particular purpose on this product is limited to the 

applicable warranty period set forth above.

How state law relates to this warranty:

• Some states do not allow the exclusion nor limitation of incidental or 

consequential damages, or limitations on how long an implied warranty 

lasts so the above limitations or exclusions may not apply to you.

• This warranty gives you specific legal rights, and you also may have other 

rights that vary from state to state.

If you purchased your product outside the USA:

• This warranty does not apply. Contact your dealer for warranty 

information.

0.676810s