GE 51147 Wireless Remote Transmitter Owner's Manual

GE Alarms Owner's Manual - 51147 Wireless Remote Transmitter.
Download
Page  of 1
4.1, 1449 votes
background image

Key Chain Remote

RF

100TXPS

Whole-Home Control

RF

2000KINPS

Motion-Sensing Control

RF6

13TX

Operating Instructions
1. Find the slot labeled HOUSE CODE on the back of the unit.
2. Set the HOUSE CODE to any one of the fol owing settings:

NOTE: Make sure ALL your GE Smart Remote Plus devices have the same HOUSE CODE setting. 

The transmitters WILL NOT control the receivers if they have dif erent HOUSE CODE settings.

IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on / of ).

If you experience interference, change the HOUSE CODE on al  your GE Smart Remote Plus 

transmitters and receivers to a dif erent setting.

3. Set the CHANNEL by using the knob on front as shown.

NOTE: If you set your Wal  Mount Control to CHANNEL 1, the unit can control
any receiver set to CHANNEL 1.  If you set your Wal  Mount Control to
CHANNEL 2, the unit can control any receiver set to CHANNEL 2 . . and so on.

IMPORTANT! A transmitter wil  control a receiver ONLY if they have the same

HOUSE CODE and CHANNEL settings.

4. Mounting

NOTE: Mounting the Wal  Mount Control on masonry or metal wal s may degrade the functional 
range.

Tape Mounting
A. Make sure surfaces are free of dust, oil and other substances that could af ect adhesion.
B. Attach the double-sided tape to back of the Wal  Mount Control housing.
C. Press the tape firmly to the mounting surface.

Screw Mounting
A. Using a slotted screwdriver, remove the faceplate of the Wal  Mount Control.
B. Place the detached back plate where desired and mark screw locations.
C. Insert the mounting screws into the back plate holes and screw into place.
D. Replace the Wal  Mount Control faceplate.

5. Use the toggle button to activate the Wal  Mount Control (ON/OFF operation).  Make sure 
  to press firmly and for a minimum of 1 second for best results.  An indicator lights RED when 
  a signal is sent.

6. Using any of the receivers set to the same CHANNEL and HOUSE CODE, test the instal ation by using 

the ON and OFF buttons.

If your unit does not work properly or if you want additional assistance, please cal  1-800-443-4924. 

We would be happy to answer ALL of your questions. Visit us on the web at www.GESmartHome.com 
to download application notes, manuals and to find out more about the GE SmartHome™ product line!

Specifications

Battery  Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Use  ONLY  A23  (12V)  Alkaline

NOTE:  The  functional  range  wil   decrease  as  the  battery  wears  out  so  make  sure  to  replace  the 
battery every 6 months for best results.

*Functional range may be adversely af ected by one or more of the fol owing factors: weather, radio 
   frequency interference, low transmit er bat ery and obstructions between the transmit er and receiver.

This device complies with Part 15 of the FCC rules. Operation is subject to the fol owing two conditions:
1. This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause undesired 

operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance 
could void the user's authority to operate the equipment.

GE is a trademark of the General Electric Company
and is used under license to 
Jasco Products Company LLC,
311 N.W. 122nd Street, 
Oklahoma City, OK 73114.
www.jascoproducts.com.

90 DAY LIMITED WARRANTY:  Jasco Products Company warrants this product to be 
free from manufacturing defects for a period of ninety days from the original date of 
consumer purchase.  This warranty is limited to the repair or replacement of this 
product only and does not extend to consequential or incidental damage to other 
products that may be used with this unit.  This warranty is in lieu of al  other 
warranties express or implied.  Some states do not al ow limitations on how long an 
implied warranty lasts or permit the exclusion or limitation of incidental or 
consequential damages, so the above limitations may not apply to you.  This 
warranty gives you specific rights, and you may also have other rights which vary 
from state to state.   If unit should prove defective within the warranty period, return 
prepaid with dated proof of purchase to:
Jasco Products Company
311 N.W. 122nd 
Oklahoma City, OK.  73114

Enclosed you wil  find

• (1) Wal  Mount Control

• Double-Sided Tape / Screws

   (for mounting)

• 

12V A23 Battery (instal ed)

The GE Smart Remote Plus advantage

Any transmitter in the GE Smart Remote Plus

product line is capable of control ing every

receiver—the ultimate in home convenience.

Control any number of  light fixtures or 

appliances  from up to 150ft* away by

choosing the transmitter and receiver 

combination that best suits your needs.

The fol owing GE Smart Remote Plus receivers (sold separately) can be control ed by THIS transmitter:

The receivers above can also be control ed by the fol owing GE Smart Remote Plus transmit ers (sold separately):

IMPORTANT! These devices are NOT compatible with devices from other systems.

You must purchase Smart Remote Plus transmitters and receivers to ensure compatibility.

Wireless Remote Transmitter

Indoor Outlet

RF

100RXPS

Outdoor Outlet

RF

106RXPS

Socket Adapter

RF

104RXPS

Wall Switch

RF

102RXPS

Wall Mount Control

RF

102TXPS

INCLUDED!

1

2

3

4

5

6

7

8

User’s Manual

Expanding your system

The GE Smart Remote Plus  devices operate on any of 8 user-settable channels. The channels 

are easy to set / adjust – with the simple turn of a knob.  Set up your GE SmartHome™ by 

purchasing as many transmitters and receivers as you need. The fol owing table is just one 

example of how you  can configure your Smart Remote Plus  system:

Area 

CH  Transmitters 

Receivers

Bedroom 

1  Bedside - Wal  Mount Control 

(2) Bedside Lamps - (2) Socket Adapters

   

 

Entrance - Wal  Mount Control  Corner Torchiere - Indoor Outlet Adapter

   

 

 

Overhead Light Fixture - Wal  Switch

   

 

 

Entertainment System - Indoor Outlet Adapter

Living Room  2  Cof ee Table - Timer/Control er  (2) End Table Lamps - (2) Socket Adapters
   

 

Entrance - Wal  Mount Control  Overhead Light Fixture - Wal  Switch

   

 

 

Entertainment System - Indoor Outlet Adapter

   

 

 

Christmas Tree - Indoor Outlet Adapter

   

3   

Window Santa - Indoor Outlet Adapter

   

 

 

Lighted Poinsettia - Indoor Outlet Adapter

Basement 

4  Entrance - Wal  Mount Control  (4) Overhead Can Fixtures - (4) Socket Adapters

   

 

 

(2) Fluorescent Fixtures - (2) Indoor Outlet Adapters

Garage 

5  Entrance - Wal  Mount Control  (2) Fluorescent Fixtures - (2) Outdoor Outlet Adapters

   

 

 

Overhead Light Fixture - Wal Switch

Outdoor 

6  Foyer- Wal Mount Control 

Entry Light - Wal Switch

   

 

Car Keys - Key Chain Remote 

Coach Lantern - Wal Switch

   

7   

Christmas Lights - Outdoor Outlet Adapter

   

 

 

Yard Santa - Outdoor Outlet Adapter

Kitchen 

8  Entrance - Wal Mount Control 

Cof ee Maker - Indoor Outlet Adapter 

1 2

ON

GE SmartSecurity™ System

GE Smart Remote Plus

Transmitter

CONTROL 

ANY NUMBER OF RECEIVERS IN UP TO 8 AREAS OF YO

UR HOME

 

Related Manuals for GE 51147 Wireless Remote Transmitter

0.559814s