GE 45255 Digital Home Monitoring Kit Owner's Manual | Page 10

GE Monitors Owner's Manual - 45255 Digital Home Monitoring Kit.
Download
Page  of 15
4.1, 1935 votes
background image

10

• Press and release the ‘quad/scan’ button until multiple
   camera video streams appear on the screen.

1

1

2

3

4

3

2
4

QUAD VIEW

2. Sequential (Scan)

• Displays each paired camera every 7-seconds.
• Press and release the ‘quad/scan’ button until a single camera 

video stream appears. 

• View individual camera continuously.

3. Manual (Single Camera View)

• Press and release the ‘manual’ button. Tap repeatedly to cycle 

through all cameras paired to monitor.

 LIVE VIDEO WITH 1ST PRIORITY MOTION AND/OR 
SOUND DETECTION

NOTE: See ‘how-to’ instructions in ‘The Basics’ section of 
the manual.

• WITHOUT notifi cation alarm

...To be notifi ed with the screen in stand-by mode
In addition to turning the screen back on when motion and/
or sound is detected, the screen will ‘jump’ to the applicable 
camera. The screen will remain lit for approximately 15 seconds 
after the video motion or sound stops.

...To be notifi ed with the screen illuminated
—NOT SUPPORTED— 

• WITH notifi cation alarm

...While the screen is ON
While in manual or scan view, sounds 4 beeping tones when 
audio or video motion is detected. Alarm can be triggered 
repeatedly for an indefi nite period of time.

NOTE: Alarm only sounds when applicable camera is displayed on 
the screen.

...While the screen is in standby mode
In addition to turning the screen back on and beeping 4 
tones when motion and/or sound is detected, the screen will 

‘jump’ to the applicable camera. The screen will remain lit for 
approximately 15 seconds after the video motion or sound stops.

 RECORDING WITH OPTIONAL MICRO SD™ CARD
      (Micro SD™ card sold separately)

NOTE: Before recording, it’s recommended to set the 
correct date and time. Refer to the ‘Settings’ section 
of the manual for instructions. When activated, the 
directional keypad, ‘menu’ button, ‘ok’ button and 
‘volume’ buttons are disabled. Not supported in 
quad view (multi-screen).

Manually Record
1. Press and release the ‘man’ button on the right side of the
    monitor. Recording will begin immediately and ‘REC’ will
    appear fl ashing on top of the display. Additionally, the name
    of the recording is shown to the right of ‘REC’ in blue.

NOTE: Maximum recording time is 10 minutes of continuous motion 
and/or sound detected by camera. After 10 minutes, the monitor will 
record to a new fi le if camera still detects motion and/or sound. The 
task will repeat itself indefi nitely until all storage space is consumed 
(unless the overwrite feature is activated).

2. To stop recording, press and release 
    the ‘man’ button again. Both the name 
    and ‘REC’ on the display will disappear. 
    A new fl ashing yellow icon will appear 
    indicating a new fi le was recorded 
    and ready for playback.

32GB

actual size

manual 
record

automatic
record

0.502989s