GE 3020511 User's Manual

GE Water System User's Manual - 3020511.
Download
Page  of 4
4.6, 1900 votes
background image

Brine Valve PN 3020511

Installation Manual

Thank you for choosing the GE Safety Brine Valve. For a 
complete water conditioner system, a brine valve is 
indispensable for system protection and regeneration, as 
wel  as ensuring the best water conditions.
The innovative design of the Brine Valve provides safe and 
reliable performance, and is suitable for household and 
commercial conditioner systems. This manual will help 
you better understand the structure and properties of the 
valve and will guide you through the instal ation.
We urge you to read this manual careful y and refer to it 
any time a malfunction occurs. The Troubleshooting Table 
highlights minor problems that you can correct yourself.

Overview
The brine valve is suitable for household use. For a water 
conditioner system, the brine valve has two principal 
functions:
Air Check function - During system regeneration or a slow 
rinse period, the brine valve prevents air from being pulled 
into the resin tank, thereby ensuring the system’s 
performance.
Refill Protection - “over-refil ” may occur if the control 
valve was set incorrectly or a system failure occurs. If this 
happens, the brine valve is a protective device against 
overfilling the brine tank.

Product Features

Positive automatic opening and closing of the valve by 
using vacuum or pressure.

Unique mechanical structure developed according to 
scientific principles providing the best reliability.

Highly expandable interface with replacement 
fittings, to coordinate different uses of the control 
valve.

Adjustments are designed for ease of use and fast set-
up. 

Flow control is regulated by the body. Brine valve is 
suitable for most water conditioning systems.

Specifications
Dimensions:
32" high unit: 

3.2" L x 2.8" W x  27.38" H
(80 mm x 71 mm x 695 mm)

Rated Pressure:

20 - 120 psi (0.14 - 0.83 MPa)

Temperature Range:

34 - 140°F (1 - 60°C)

Used Media:

Clean municipal water or 

brine

Max. Refil  Water FLow:

1.2 GPM (4.5 L/m)

Max. Brine Flow:

1.0 GPM (3.7 L/m)

Materials:
Main Valve: 

ABS & PE

Seal: Chlorine/Chloramines 

resistant silicone rubber

Regenerant Tube Connection
The brine valve is compatible with a 3.5" (90 mm) GE brine 
wel , see Figure 1. The regenerant tube links the control 
valve and the brine valve. Place one end of the right angle 
elbow through the hole of the brine wel . Slide the nut, 
retaining sleeve and plastic gripper over the regenerant 
tube. Insert the inner tube support and connect the 
regenerant tube to the elbow. Finally, connect the other 
end of the regenerant tube to the control valve.

Figure 1

0.598426s