GE 26929C/D User's Manual

GE Telephone User's Manual - 26929C/D.
Download
Page  of 2
4.4, 2298 votes
background image

INTRODUCTION
Your Caller ID phone stores and displays specific
information, provided by your local telephone company, to
subscribers of Caller ID or similar caller identification
services. You must subscribe to one of these services in
order to use this unit.

Your Caller ID phone enables you to:

• Identify callers before you answer the phone.

• View the time and date of each incoming call.

• Record up to 40 Caller ID messages sequentially.

• Know who called while you were away.

To get the most from your new phone, we suggest that you
take a few minutes right now to read through this user's guide.

IMPORTANT:

 In order to use this unit, you must

subscribe to either the standard Name/Number Caller
ID Service or Caller ID with Call Waiting Service. To
know who is calling while you are on the phone, you
must subscribe to Caller ID with Call Waiting Service.

IMPORTANT:

 Because cordless phones operate on

electricity, you should have at least one phone in your
home that isn’t cordless, in case the power  in your
home goes out.

CAUTION: 

When using telephone equipment,

there are basic safety instructions that should
always be followed. Refer to the IMPORTANT
SAFETY INSTRUCTIONS provided with this
product and save them for future reference.

BEFORE YOU BEGIN

PARTS CHECKLIST
Make sure your package includes the items shown here.

INSTALLATION
DESKTOP INSTALLATION

NOTE:

 For desktop charging only, the handset is able

to charge facing up or down.

1. Place the handset in the base.

2. Raise the base antenna.

3. Plug the power supply cord into an AC outlet. The

CHARGE/IN USE indicator comes on indicating that the
battery is charging.

Allow the phone to charge for 12 hours before
using the first time. If you don't charge the phone
properly (for 12 hours) when you first set up the
phone, performance of the battery will be
compromised.

4. After charging, connect the telephone line cord to the

wall jack.

5. Set the RINGER switch on the handset to ON.

NOTE :

 The phone automatically defaults to touch-

tone dialing. To change to pulse (rotary) dialing, see
“Tone/Pulse Dialing.” If you don’t know which type of
service you have, check with the phone company.

WALL MOUNT INSTALLATION
Because it is necessary to charge the handset for 12 hours
prior to connecting the phone for use the first time, it is
better to leave the unit on a flat surface during initial
charge before attempting to hang it on the wall.

1. Remove the handset hook; turn it upside down, and put

it back in the slot. You need to do this so the handset
doesn't fall out of the base when it is on the wall.

2. Set the RINGER switch on the handset to ON.

3. Place the handset in the base.

4. Plug the power supply into the base and then into an AC

outlet.

The CHARGE/IN USE indicator comes on indicating that
the battery is charging.

Allow the phone to charge for 12 hours before using
the first time. If you don't charge the phone
properly (for 12 hours) when you first set up the
phone, performance of the battery will be
compromised.

5. After charging, plug telephone line cord into the wall jack.

Then stuff the
excess ine cord
into the mounting
bracket.

6. Attach the wall

mount bracket by
inserting the two
tabs at the top
and then
snapping the tab
at the bottom into
place.

7. Slip the mounting

holes over the
wall plate posts
and slide the unit
down firmly into place. (Wall plate not included.)

8. Raise the base antenna.

NOTE :

 The phone automatically defaults to touch-

tone dialing. To change to pulse (rotary) dialing, see
“Tone/Pulse Dialing.” If you don’t know which type of
service you have, check with the phone company.

CORDLESS PHONE BASICS

RECEIVING A CALL
1. Check the display to see who is calling.

2. Press the TALK button.

MAKING A CALL
To make a call, press the TALK button before you dial and
press it again to hang up.

REDIAL
While the phone is on, press the REDIAL button to redial
the last number you dialed (up to 32 digits). If you get a
busy signal, and want to keep dialing the number, just
press REDIAL again (you don't have to turn the phone off
and back on).

FLASH
Use the FLASH button to activate custom calling services
such as call waiting or call transfer, which
are available through your local phone company.

TIP:

 Don’t use the TALK button to activate custom

calling services such as call waiting, or you’ll hang up
the phone.

CHANNEL BUTTON
While talking, you might need to manually change the
channel in order to get rid of static. Press and release the
CHANNEL button to advance to the next clear channel.

TEMPORARY TONE
This feature enables Pulse (rotary) service phone users to
access touch-tone services offered by banks, credit card
companies, etc., by pressing the TONE button to temporarily
make the phone touch-tone compatible. To get information
about your bank account, for example, you would:

1. Call the bank’s information line.

2. Press the TONE button (*) after your call is answered.

3. Follow the voice instructions to complete your transaction.

4. Hang up when finished. The phone returns to Pulse

(rotary) service.

FINDING THE HANDSET
This feature helps to locate a misplaced handset.

Press the PAGE button on the base. The handset beeps
continuously for about 2 minutes or until you press any button
on the handset. You can also press PAGE again to cancel.

NOTE:

 The ringer does not have to be on for this

feature to work.

RINGER SWITCH
The RINGER switch must be ON for the handset to ring
during incoming calls.

TONE/PULSE DIALING
This adjustment allows you to select tone (touch-tone) or
pulse (rotary) mode dialing. The phone is automatically set
for touch-tone use.

TONE
1. Make sure the phone is OFF.

2. Press and hold the CHANNEL button for 2 seconds until

the phone beeps.

3. Press TONE*.

PULSE
1. Make sure the phone is OFF.

2. Press and hold the CHANNEL button for 2 seconds until

the phone beeps.

3. Press #.

VOLUME
The VOLUME button controls the volume of the
handset's earpiece.

VOICE MESSAGING
Provided your phone
company offers voice
messaging service and you
subscribe to it, the CHARGE/
IN USE indicator on the base
flashes when the phone is
not in use to indicate there is
a message waiting. It stops
flashing after the message
has been reviewed.

CALLER ID FEATURES
This unit receives and displays information transmitted by
your local phone company. This information can include
the phone number, date, and time; 

or the name, phone

number, date, and time. The unit can store up to 40 calls
for later review.

CALLER ID WITH CALL WAITING
Provided you subscribe to Caller ID with Call Waiting
service from your phone company, you are able to see who
is calling when you hear the call waiting beep. The caller
identification information appears in the display after you
hear the tone.

• Press the FLASH button to put the current person on

hold so that you can answer the incoming call.

IMPORTANT:

 In order to use this unit, you must

subscribe to either the standard Name/Number Caller
ID Service or Caller ID with Call Waiting Service. To
know who is calling while you are on the phone, you
must subscribe to Caller ID with Call Waiting Service.

RECEIVING AND STORING CALLS
When you receive a call, the information is transmitted by
the phone company to your Caller ID telephone between
the first and second ring.

When the memory is full, a new call automatically replaces
the oldest call in memory. 

NEW appears in the display for

calls received that have not been reviewed.

NOTE:

 Check with your local phone company

regarding name service availability.

REVIEWING RECORDS
As calls are received and stored, the display is updated to
let you know how many calls have been received.

• Press the arrow down button to scroll through the call

records from the most recent to the oldest.

• Press the arrow up button to scroll through the call

records from the oldest to the newest.

• To display the last Caller ID record reviewed, make sure

the phone is OFF. Then press REDIAL. To dial the number,
press REDIAL again. The number dials automatically.

DELETING RECORDS
Use the DELETE button to erase the record currently shown
in the display or all records.

DELETING THE CURRENT RECORD
1. Make sure the phone is OFF.

2. Use the arrow buttons to display the desired Caller ID record.

3. Press DELETE. The display shows 

ERASE CALL ID?

4. Press DELETE again to erase the record.

DELETING ALL RECORDS
1. Make sure the phone is OFF.

2. Use the arrow buttons to display the desired Caller ID record.

3. Press and hold DELETE. The display shows 

ERASE ALL?

4. Press DELETE again to erase all records.

DIALING A CALLER ID NUMBER
1. Make sure the phone is OFF.

2. Use the arrow buttons to display the desired Caller ID record.

3. Press CALL BACK. The number dials automatically.

SETTING YOUR LOCAL AREA CODE
1. Press and hold the CHANNEL button until “AREA

CODE=000” shows in the display.

2. Use the handset number pad to enter your 3-digit code.

NOTE:

 To clear your local area code, press and hold

the CHANNEL button until your area code appears in
the display, then press 000.

CHANGING THE NUMBER FORMAT
The FORMAT button lets you change the format of the
displayed number. The available formats are as follows.

7-digit

7-digit telephone number.

10-digit

3-digit area code + 7-digit telephone
number.

11-digit

long distance code “1” + 3-digit area code +
7-digit telephone number.

1. Use the arrow buttons to scroll to the number you want

to call back.

2. If the number will not dial as shown, press the FORMAT

button. Repeat if necessary, until the correct number of
digits are shown.

3. Press CALL BACK. The number dials automatically.

MEMORY
Store up to ten 24-digit numbers in memory for quick
dialing. This memory feature is in addition to the 40 Caller
ID records that can be stored in the Caller ID memory log.

STORING A NUMBER IN MEMORY
1. Make sure the phone is OFF.

2. Press the MEMORY button.

3. Press the memory location number (0-9).

4. Press MEMORY again. The display shows 

ENTER NAME.

NOTE: 

 If  you don't want to enter the name, skip step 5.

5. Use the keypad to store a name (up to 15 characters).

More than one letter or character is stored in each of the
number keys. For example, to enter Joe Smith, press 5
for J; press 6 three times for O; press 3 two times for E;
press 1 to enter a space before you start entering the
last name; press 7 four times for S; press 6 for M; press
4 three times for I;  press 8 for T; and 4 two times for H.

If you're using two letters consecutively that are stored
in the same number key, you must press FORMAT
between the letters. For example, if you enter Barb,
press 2 two times for B; press FORMAT; press 2 for A; 7
three times for R; and 2 two times for B. You need to
press FORMAT between the B and the A since they are
stored within the same number key.

6. Press MEMORY. The display shows 

ENTER TEL NUMBR.

7. Use the keypad to enter the number you want to store

(up to 24 digits). To add a pause, See “Inserting a Pause
in the Dialing Sequence.”

8. Press MEMORY again to store the number.

26929

40-Channel 900Mhz Caller ID with
Call Waiting  Cordless Telephone
User's Guide

We bring good things to life.

IMPORTANT INFORMATION
NOTICE: 
The Industry Canada label identifies certified equipment. This
certification means that the equipment meets certain telecommunications
network protective, operational and safety requirements. The Industry Canada
does not guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.

Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water
pipe systems, if present, are connected together. This precaution may be
particularly important in rural areas.

CAUTION: Users should not attempt to make such connections themselves,
but should contact the appropriate electric inspection authority, or electrician,
as appropriate.

NOTES: This equipment may not be used on coin service provided by the
telephone company.

Party lines are subject to telephone company tariffs and, therefore, you may
not be able to use your own telephone equipment if you are on a party line.

Check with your local telephone company.

INTERFERENCE INFORMATION
This equipment generates and uses radio frequency energy which may
interfere with residential radio and television reception if not properly
installed and used in accordance with instructions contained in this manual.
Reasonable protection against such interference is ensured, although there is
no guarantee this will not occur in a given installation. If interference is
suspected and verified by switching this equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following
measures: Reorient the radio/television receiver’s antenna, relocate the
equipment with respect to the receiver, plug the equipment and receiver into
separate circuit outlets. The user may also wish to consult a qualified radio/
television technician for additional suggestions. This equipment has been
fully tested and complies with all limits for Class B computing devices
pursuant to part 15 FCC Rules and Regulations. This device complies with
RSS-210 of Industry Canada. Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) This device
must accept any interference, including interference that may cause
undesired operation of the device.

Model 26929C/D
15790500 (Rev. 0 CAN E)
01-19
Printed in China

Base

Handset

Mounting bracket

CHARGE/ IN USE

PAGE

5

3

2

4

1

4

1

2

3

5

7

6

8

CHARGE/ IN USE

PAGE

CHARGE/IN USE indicator

Caller ID name

10:28 10/20

03

3175551234

FRED PAGE

PM

REPT

CALL 

#

Time

Date

Number of calls

Caller ID phone number

ATLINKS Communications Canada, Inc.

(An Alcatel / Thomson Joint Venture)

© 2001 ATLINKS Communications Canada, Inc.

Trademark(s) ® Registered

Marque(s) ® déposée(s)

MODULAR JACK REQUIREMENTS
You need an RJ11 (CA11A) type modular phone
jack, which is the most common type of phone jack
and might look like the one pictured here. If you
don’t have a modular jack, call your local phone
company to find out how to get one installed.

INSTALLATION NOTE:

  Some cordless telephones

operate at frequencies that may cause interference to
nearby TVs and VCRs. To minimize or prevent such
interference, the base of the cordless telephone
should not be placed near or on top of a TV or VCR. If
such interference continues, move the cordless
telephone farther away from the TV or VCR.

DIGITAL SECURITY SYSTEM
Your cordless phone uses a digital security system to
provide protection against false ringing, unauthorized
access, and charges to your phone line.

When you place the handset in the base, the unit verifies
its security code. After a power outage or battery
replacement, you should place the handset in the base for
about 20 seconds to reset the code.

Belt clip

SEE MARKING ON BOTTOM / BACK OF PRODUCT

RISK OF ELECTRIC SHOCK
            DO NOT OPEN

WARNING: TO PREVENT FIRE OR
ELECTRICAL SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT  TO
RAIN OR MOISTURE.

THE LIGHTNING FLASH
AND ARROW HEAD
WITHIN THE TRIANGLE
IS A WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE THE
PRODUCT.

CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.

THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU  OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING THE
PRODUCT.

CAUTION:

10:28 10/20

03

3175551234

FRED PAGE

PM

REPT

CALL 

#

VOLUME

CID REVIEW

CALL BACK

DELETE

RINGER

OFF

ON

FLASH

FORMAT

CHANNEL

REDIAL

MEMORY

WXYZ

9

TUV

8

PQRS

7

MNO

6

JKL

5

GHI

4

DEF

3

ABC

2

1

#

OPER

0

TONE

*

TALK

10:28 10/20

03

3175551234

FRED PAGE

PM

REPT

CALL 

#

VOLUME

CID REVIEW

CALL BACK

DELETE

RINGER

OFF

ON

FLASH

FORMAT

CHANNEL

REDIAL

MEMORY

WXYZ

9

TUV

8

PQRS

7

MNO

6

JKL

5

GHI

4

DEF

3

ABC

2

1

#

OPER

0

TONE

*

TALK

CHANNEL
button

DELETE/
FLASH
button

TALK
button

CALL BACK/
REDIAL button

TONE
button

RINGER
switch

VOLUME
button

FORMAT
button

MEMORY
button

0.602656s