GE 19210 GE Wireless Push Button (White) Owner's Manual

GE Door Owner's Manual - 19210 GE Wireless Push Button (White).
Download
Page  of 6
4.1, 1339 votes
background image

             GE Model 19210/19211 

                                                                          www.jascoproducts.com 

    

Wireless Pushbutton  

 
Required Tools: Small flat blade screwdriver, drill, drill bit, and phillips screwdriver. 
 
Included Hardware:  
(2) 3x20mm screws 
(2) Double sided adhesive pads 
 
Required Tools: Small flat blade screwdriver, drill, drill bit, and phillips screwdriver. 
 
 

Chime Tune Setting 
All wireless chimes may have more than one push button. The chime tune for each push 
button is set with jumpers 7-9. 
 
Single Push Button Kit:  If you purchased a kit with a single push button, the chime 
tune will be set to Ding Dong from the factory. 
Dual Push Button Kit:  If you purchased a kit with two push buttons, one push button 
will be set to Ding Dong and the other push button will be set to Westminster from the 
factory.    
The following instructions explain how to change the tune on any wireless push button. 

1.  Remove the battery from the push button transmitter. 
2.  Locate the 9 position jumper shown below. 

 

9 position jumper (This pushbutton is set for Ding Dong Chime since 7=off, 8=on, and 
9=off.) 
 

3.  Select the desired chime sound from the table below. 

Chime Sound Table 
Position                7 

         8 

 

  9 

Westminster 

 ON  OFF 

 OFF 

Ding 

Dong  OFF 

 ON  OFF 

Knock             

OFF   

OFF   

ON 

Bronze 

Chime 

 

 

 

 

ON  ON  OFF 

Cuckoo Clock     ON 

 

OFF   

ON 

Foghorn             OFF   

ON 

 

ON 

Gong            

 

 ON  ON  ON 

Related Manuals for GE 19210 GE Wireless Push Button (White)

0.469390s