GE 19208 GE Wireless SevenSound Door Chime One Push Button Owner's Manual | Page 4

3.  Locate the House Security Code door and screw located  on the 

back of the chime (See the chime components picture above).  Remove 
the screw and take off the door. 

4.  Locate the chime and pushbutton jumpers shown below. 

 
 
 
                                                        Chime and Pushbutton Jumpers 
 
 

5.  To change the house code, add or remove jumpers as needed.  It is 

recommended to change only one jumper at a time and then test the 
system for proper operation. The jumpers on the chime and pushbutton 
must match exactly. 

House Code Jumpers