GE 15312 Sun Smart Digital Timer Quick Reference Guide
The screen wil show DUSK (Sunset) and a time with the hour blinking. This is the timers
preset time for DUSK. If the hour is not correct use the + or – buttons to adjust the hour to
match DUSK for your area. Press “ENTER” to confirm. If the hour is correct press “ENTER” to
move to the next step. The minutes are now blinking. If the minutes are not correct use the
+ or – buttons to adjust the minutes to match DUSK for your area. Press “ENTER” to confirm.
If the minutes are correct press “ENTER” to move to the next step.
12. The screen wil now say “SAVE.” Press “ENTER” to save data to the timer.
Programming ON/OFF Events:
1. Press “SETUP” twice to begin programming times.
2. P1 (Program 1) ON should be blinking. Press “ENTER” to begin setting P1 ON time. You may
also use the + or – buttons to scrol through al 7 programs.
3. The screen wil show SET, if you wish to set a time press “ENTER” to confirm. You may also
use the + or – button to scrol to DEL. If you press “Enter” on DEL you wil delete the program
you are on.
If you pushed “ENTER” at SET for P1 the screen wil show PRG, P1 ON and the days of the week
wil be blinking. Use the + or – buttons to scrol through the options in which the timer wil be
active. The options are:
• S, S • M, T, W, F • M through S: Individual days • T, TH • M, W, F • S, M, T, W, Th, F, S (default)
Choose the days you want the program to be active and press “ENTER.”
Now that you have chosen the days the timer wil function the next step is to choose the time.
The screen should show DAWN blinking. There are 3 options to choose from when selecting the
program ON time. Use the + or – to scrol through the options. • DAWN • DUSK • TIME (to set
custom time).
If you would like the timer to turn on at the Pre Set time for DAWN press “ENTER” and move to
P1 OFF setting.
If you would like the timer to turn on at the Pre Set time for DUSK use the + or – buttons to
change the option on the screen to DUSK and press “ENTER” and move to P1 OFF setting
If you would like choose a custom time other than DAWN or DUSK use the + or – buttons to
change the option on the screen to TIME and press “ENTER”. The hour should be blinking. Use
the + or – to set the correct hour. If you pass 11 to 12 you wil change the AM to PM. Once the
correct hour is found press “ENTER” to confirm. The Minute should be blinking. Use the + or – to
set the correct minute. Press “Enter” to confirm.
The screen wil show PRG, P1 OFF and the days of the week wil be blinking. Choose the days
you want the program to be active and press “ENTER”. Now that you have chosen the days the
timer wil function the next step is to choose the time the program wil turn off. There are 3
options to choose from when selecting the program OFF time. Use the + or – to scrol through
the options. • DAWN • DUSK • TIME
If you would like the timer to turn off at the Pre Set time for DAWN press “Enter” .
If you would like the timer to turn off at the Pre Set time for DUSK use the + or – buttons to
change the option on the screen to DUSK and press “ENTER” .
If you would like choose a custom time other than DAWN or DUSK use the + or – buttons to
change the option on the screen to TIME and press “ENTER”. The hour should be blinking. Use
the + or – to set the correct hour. If you pass 11 to 12 you wil change the AM to PM. Once the
correct hour is found press “ENTER” to confirm. The Minute should be blinking. Use the + or – to
set the correct minute. Press “ENTER” to confirm. The screen wil now say “SAVE” Press “ENTER”
to save program 1 to the timer. P2 (Program 2) ON should be blinking. Press “ENTER” to begin
setting P2 ON. You may also use the + or– buttons to scrol through al 7 programs or push
AUTO to complete the programming.
Random Security Option:
The random feature wil turn lights on and off using the programmed times + or – 30 minutes,
giving the house a more lived in appearance while occupant is away.
1. Push RND (Random) button to activate the Random feature. The screen wil change from
AUTO to RDM.
2. Push AUTO button to de-activate the Random feature and return the timer to its current
programming.
Note: The timer wil automatical y return to the clock mode if a button is not pushed for 20
seconds. Push the setup button once to return to program mode if this happens.
Initial Setup:
Setting the Calendar, Clock, DST, Zone
1. Using a paper clip or pen press firmly and hold the reset button for 3 seconds or until you
see the word “RESET” scrol across the screen. Release the “RESET” button and the screen will
be flashing 12:00 AM
2. Press the “SETUP” button and CAL wil be flashing on the screen. Press “Enter” to begin
setting the Calendar.
3. The Year wil be flashing: Use the + or – buttons until the year is correct. Press “ENTER”
to confirm.
4. The Month wil be flashing: Use the + or – buttons to find the current month is correct. Press
“ENTER” to confirm.
5. The Day wil be flashing: Use the + or – buttons to find the current day. Press “ENTER”
to confirm.
6. The screen should be blinking CLK for Clock. Press “ENTER” to begin setting the clock.
7. The hour should be blinking. Use the + or – to set the correct hour. If you pass 11 to 12 you
wil change the AM to PM. Once the correct hour is found press “ENTER” to confirm.
8. The Minute should be blinking. Use the + or – to set the correct minute. Press “ENTER”
to confirm
9. The Screen should be blinking DST for “Daylight Savings Time” Press “ENTER” to set DST.
10. DST is either “ON” or “OFF”. DST wil automatical y reset the times in the timer to match the
time change. Use the + or – button to change DST setting in the timer and press “ENTER”
to confirm.
11. The screen should show the word ZONE blinking. Press “ENTER” to set your ZONE.
Look at the map below and determine which zone best fits your location. Use the + or – to
scrol through the available zones in the timer and stop when you find the zone where the
timer is being instal ed. Press “ENTER” to confirm.
The screen wil show DAWN (Sunrise) and a time with the hour blinking. This is the timers
preset time for DAWN. If the hour is not correct use the + or – buttons to adjust the hour to
match DAWN for your area. Press “ENTER” to confirm. If the hour is correct press “ENTER”
to move to the next step. The minutes are now blinking. If the minutes are not correct use
the + or – buttons to adjust the minutes to match DAWN for your area. Press “ENTER” to
confirm. If the minutes are correct press “ENTER” to move to the next step.
15312
12-17-2010
www.jascoproducts.com
SunSmartTM Digital Timer
Programming
Instructions
NORTH
ALASKA
HAWAII
NORTH
CENTRAL
CENTRAL
SOUTH
SOUTH
AUTO
ENTER
SETUP
RESET
+
-
RND
ON/OFF - Timer Override
(Push to turn ON/OFF)
SETUP
- Push once to set
Calendar/Clock.
- Push twice to set or
change programming.
RESET - Hold firmly for 3
seconds to clear all settings
and program timer.
AUTO - Push when
programming is complete
to activate timer.
UP/DOWN - Use to scroll
through menu options.
TIMER DOOR
- Close after programing.
- Push to turn ON/OFF.
(Timer Override)
ENTER - Push to
confirm settings
during programming.
RANDOM - Push once after
program is set to randomly
vary ON/OFF timers within 30
minutes of programmed times.
Related Manuals for GE 15312 Sun Smart Digital Timer
-
GE Timers 15142 Outdoor Digital Timer Owner's Manual
2 pages
-
GE Timers 15143 Outdoor Lighting Timer Owner's Manual
4 pages
-
GE Timers 15150 GE 7Day Digital Timer Owner's Manual
1 pages
-
GE Timers 15265 InWall Digital Timer Owner's Manual
2 pages
-
GE Timers 15267 PlugIn,24 hour Mechanical Timer Owner's Manual
1 pages
-
GE Timers 15270 PlugIn Digital Timer Owner's Manual
2 pages
-
GE Timers 15273 PlugIn GE 7Day Digital Timer Owner's Manual
2 pages
-
GE Timers 15312 SunSmart Digital Timer Quick Reference Guide
2 pages
-
GE Timers 15313 GE 7Day InWall Digital Timer Owner's Manual
2 pages
-
GE Timers 15318 Push Button Countdown Timer Owner's Manual
1 pages
-
GE Timers BoxTimer 15132 GE Digital Time Switch Owner's Manual
3 pages
-
GE Timers BoxTimer GE Time Switch (15087, 15207 and 56922) Owner's Manual
2 pages
-
GE Timers InWall 15071 GE Smart Digital Timer Owner's Manual
1 pages
-
GE Timers InWall 15086 GE Smart Digital Timer Owner's Manual
1 pages
-
GE Timers Outdoor 15112 Mechanical Countdown Timer Owner's Manual
1 pages
-
GE Timers PlugIn 15075 Mechanical Timer Owner's Manual
1 pages
-
GE Timers PlugIn 15076 Mechanical Timer Owner's Manual
1 pages
-
GE Timers PlugIn 15091 GE 7Day Digital Timer Owner's Manual
1 pages
-
GE Timers PlugIn 15119 24 hour Mechanical Timer Owner's Manual
1 pages
-
GE Timers PlugIn 15151 Mechanical 7Day Timer Owner's Manual
1 pages
-
GE Timers PlugIn 15152 Mechanical Timer Owner's Manual
1 pages
-
GE Timers PlugIn Digital Timer 15079 Owner's Manual
2 pages
-
GE Timers PlugIn Digital Timer 15089 Owner's Manual
2 pages
-
Intermatic Timers SS7C User's Manual
2 pages