Gateway E-6500D Quick Start Manual

Gateway Desktops Quick Start Manual - E-6500D.
Download
Page  of 6
4.5, 1984 votes
background image

About RAID

www.gateway.com

1

About RAID

RAID (Redundant Array of Inexpensive/Independent Disks) lets your computer use 
multiple hard drives more efficiently. Your computer supports RAID 0, RAID 1, 
RAID 5, and RAID 10.

RAID for performance

RAID 0 lets your computer see multiple hard drives as a single drive. This type 
of RAID can increase file access speeds, which is important if you work with 
video editing, sound editing, and high-performance games. RAID 0 is also an 
affordable way to increase your total file storage capacity. 

How it increases performance

The more drives you have in your RAID 0 array, the faster the potential drive 
reading performance. All hard drives have limitations on how fast they can read 
and write files. If half a file is stored on one RAID 0 drive and the other half on 
another RAID 0 drive, each drive only has to read half of the file. So, the entire 
file is accessed by the computer up to twice as fast (using a two-drive RAID 0 
array). In a three-drive RAID 0 array, if the file is evenly distributed among the 
drives, each drive must read only a third of the file, and so on. If the entire file 
happens to be stored on only one of the drives, the file is accessed at the same 
speed as if it were on a standard hard drive setup. Dividing up files between 
multiple hard drives like this is called striping.

How it makes file storage cheaper

Because RAID 0 lets your computer see multiple hard drives as a single drive, 
you can install several lower capacity (less expensive) drives and have the same 
single-drive storage simplicity and capacity as a larger, more expensive hard 
drive.

Drawbacks

Unfortunately, RAID 0 lets multiple drives behave as one in another way. If part 
of the array fails (such as a hard drive crashing), the entire array fails. Because 
the drives are treated like a single drive, parts of files (including operating 
system files) can be spread across several drives, leaving the computer with only 
file fragments if one drive fails. Regular and frequent backups are critical.

Another drawback is that RAID 0 treats each hard drive as if it has the storage 
capacity of the smallest drive in the array. So if you have three drives (300 GB, 
250 GB, and 200 GB) in a RAID 0 array, your computer only recognizes 600 GB 
total capacity.

0.476106s