Garmin zumo 660 and Scala Rider Q2 Installation Instructions

Garmin Motorcycles Installation Instructions - zumo 660 and Scala Rider Q2.
Download
Page  of 4
4.1, 1110 votes
background image

zūmo 660 Installation Instructions

Mount Your zūmo on the Motorcyle

Warning: Incorrectly wiring the power cable with bare wire leads can result in 

damage to the vehicle or the battery and can cause bodily injury. Garmin strongly 

recommends having an experienced installer with the proper knowledge of electrical 

systems install the unit.

 See the Important Safety and Product Information guide in the product box for product warnings 

and other important information.

Step 1: Connect Power to the Mount

Select a suitable and secure location to mount the zūmo on your motorcycle, based on 

available power sources and safe cable routing.

Cradle

Headphone/audio out jack (3.5 mm)

Microphone jack (2.5 mm)

Mini-USB connector 

(for traffic receiever)

Bare wires with 

inline fuse for 

power connection

Power cable

Step 2: Install the Handlebar Base

The zūmo includes parts for two handlebar installation solutions. Custom mounts can 

require additional hardware (www.ram-mount.com).

A) To install the U-bolt and handlebar base:

1. PlacetheU-boltaroundthehandlebar,andthreadtheendsthroughthehandlebar

base.

2. Tightenthenutstosecurethebase.Donotovertighten.

note: The recommended torque is 50 lbf-in. Do not exceed torque of 80 lbf-in.

Handlebar 

base

Handlebar 

U-bolt

0.574418s