Garmin Rino 110 Quick Start Manual

Garmin GPS Quick Start Manual - Rino 110.
Download
Page  of 2
4.7, 1359 votes
background image

Marking a Waypoint

Marking a waypoint is simply capturing your current location and 

storing it in the unit’s memory. The unit must be turned on and 

tracking satellites to mark a waypoint. 

To mark a waypoint:

1.  Press the 

Thumb Stick In and hold it until the Shortcuts 

Menu is displayed.

2.  Highlight 

Mark Waypoint and press the Thumb Stick In to 

display the Mark Waypoint Page shown below.

Mark Waypoint Page

Name 

Field

Symbol Field

3.  Highlight the 

Name field and press the Thumb Stick In. Enter 

a new name. When finished, highlight 

OK then press the 

Thumb Stick In. 

4.  Highlight the 

Symbol field and press the Thumb Stick In. 

Choose a symbol then press the 

Thumb Stick In to accept 

the selection.

5.  Highlight the 

OK button at the bottom of the page and press 

the 

Thumb Stick In to save the waypoint.

Creating a Breadcrumb Trail

As you move, notice that a breadcrumb trail of your path is left on 

the map. This trail is called a Track Log. You can use the track log to 

retrace your steps back to a certain location. 

To view your breadcrumb trail (track log):

1.  Use the 

Page button to display the Map Page. 

2.  Walk away from your original location for at least  

three minutes.

3.  The default zoom level is 80 miles. Press the 

Zoom button to 

zoom in to view the breadcrumb trail (track log) in detail. 

Sending a Location

You can send any location that you have available in your Find ‘N 

Go menu. These may be waypoints, contacts, cities, exits, or any 

other data that is loaded in the unit. Below are the steps to send a 

waypoint.

To send a location (waypoint) using Find ‘N Go:

1.  Press the 

Thumb Stick In and hold it 

until the Shortcuts Menu is displayed, 

or press the 

Page button until the 

Main Menu is displayed. 

2.  Highlight 

Find ‘N Go and press the 

Thumb Stick In. Highlight Way-

points and press the Thumb Stick 

In. Select 

Nearest or By Name and 

press the 

Thumb Stick In.

3.  Highlight the waypoint that you want to send and press the 

Thumb Stick In to display the Waypoint Review page. 

4.  Highlight the 

Option Menu button 

 and press the 

Thumb 

Stick In.

5.  Select 

Send Location and press the Thumb Stick In.

The location is sent to all Rinos on the same channel and squelch 

code as you. They can then choose to Goto that location, view the 

location on the map (Map), or save the location (OK).

Using Peer-to-Peer Positioning

The Rino’s most unique feature is Peer-to-Peer positioning, send-

ing the location of one Rino unit to other Rino units. Peer-to-Peer 

positioning allows you to track the movement of other Rino users 

and even navigate to their location. 

To send your location:

  Press and release either the 

Call or Talk button. Your Rino 

110 automatically sends out its location. Other Rino users 

monitoring the same channel and squelch code receive this 

information. 

Using Find ‘N Go

Using Find ‘N Go, you can search for a waypoint and then create a 

straight-line route to it from your current location.

To find and go to a waypoint:

1.  Press and hold the 

Thumb Stick In to access the Shortcuts 

Menu.

2.  Highlight 

Find ‘N Go and press In.

3.  Highlight 

Waypoints and press the Thumb Stick In. Select 

Nearest from the pop-up menu

4.  Use the 

Thumb Stick to select the desired waypoint from the 

list and then press In to display the Information Page for that 

waypoint. 

5.  Highlight 

Goto and press In to create a straight-line route to 

the waypoint from your current location. 

Polling a Location

If you have not heard from a contact in a while and would like to 

know that contact’s current location, you may “poll” the contact’s 

location. This will update that contact’s location in your Rino 110.

To poll a location:

1.  Press the 

Thumb Stick In and 

hold it until the Shortcuts Menu 

is displayed, or press the 

Page 

button until the Main Menu is 

displayed. 

2.  Highlight 

Find ‘N Go and press 

the 

Thumb Stick In. Highlight 

Contacts and press the Thumb 

Stick In. 

3.  Highlight the contact that you want to poll and press the 

Thumb Stick In to display the Contact Review page. 

4.  Highlight the 

Option Menu button 

 and press the 

Thumb  

Stick In.

5.  Select 

Poll Location and press the Thumb Stick In.

If you have further questions or just want to learn more about the 

operation of Rino 110, refer to the Owner’s Manual, which provides 

detailed information about all of your Rino 110’s features.

Quick Start Guide

Rino® 110

Step-by-Step Instructions 

to Get You Started

  (Turn this page and begin with Step 1)

Part Number 190-00251-01 Rev. C

Navigating with Your Rino 110

You can navigate to a waypoint, city, exit, or a contact’s location. 

Using optional detailed maps, you can also navigate to points of 

interest, addresses, and intersections. 

To begin navigation using Find ‘N Go:

1.  Press the 

Thumb Stick In to display the Shortcuts Menu.

2.  Highlight 

Find ‘N Go and press the Thumb Stick In.

3.  Highlight 

Waypoints and press the Thumb Stick In. Select 

the desired option (by 

Nearest or by Name), and press the 

Thumb Stick In.

4.  Highlight the desired waypoint and press the 

Thumb Stick In.

5.  With the Waypoint Page displayed, highlight the 

Goto button 

at the bottom of the page and press the 

Thumb Stick In to 

begin navigation. The Navigation Page automatically opens  

to guide you to your destination. See below for more  

information. 

Navigation Page
The two main components of the Navigation 

Page are the compass ring and the pointer. As 

you move, the compass ring rotates showing 

your current direction of travel at the top of 

the display. The pointer points toward your 

destination. When the pointer is aligned with 

the vertical line at the top of the compass ring, 

you are on a direct course toward your destina-

tion. The unit has to be moving to navigate. If you are standing still 

or moving very slowly, the navigation data may not be accurate.

Using Contacts

The first time you receive a signal from another Rino user, the New 

Contact page is displayed. From the New Contact page you can 

show the user’s location on your Map, Goto that position, select OK 

to add them to your contact list, or press the 

Page/Quit button to disregard the contact. 

Every time you receive signals from 

contacts, your map is updated showing their 

new position. A Track Log of their move-

ment is created and shown on your map.

Navigation Page

New Contact Page

Polling a contact’s location

Power button:

•  Press and hold to turn the  

unit On/Off

•  Press to adjust contrast 

and backlighting

Call button:

•  Press to send out Call Tone

•  Sends position when 

released (if enabled)

Talk button:

•  Press and hold to talk

•  Sends position when  

released (if enabled)

Page/Quit button:

•  Press to cycle through 

main pages

•  Used to quit or escape 

menu items

Volume (V) button:

• Press to open volume 

control window

Microphone:

• Hold unit 3–4 inches 

away when talking

Zoom/Map (Z) 

button:

•  From the Map Page, 

press to open Zoom 

control window

•  From any other 

page, press to 

display Map Page

Speaker

Thumb Stick

•  Press In to enter 

highlighted options 

and to confirm 

messages

•  Move Up, Down, 

Right or Left to 

move through lists, 

highlight fields, 

on-screen buttons, 

icons, enter data, 

or move the map 

panning arrow

•  Press In and hold 

to display Shortcuts 

Menu.

Send Location

0.583718s