Garmin POWERLITE 450W User's Manual

Garmin Projectors User's Manual - POWERLITE 450W.
Download
Page  of 4
4.3, 1094 votes
background image

Quick Setup

Before using the projector, make sure you read the safety instructions in the 
User’s Guide on your projector CD.

Connect the projector
Before you can connect to the projector, you need to loosen the screws and 
remove the cable cover.

Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projector’s Computer1 or Computer2 port, and 
the other end to your computer’s

monitor port. If you are using a 

laptop, switch it to external display. You can also connect an audio cable or 
microphone. 

Computer USB Port

Connect a computer using a USB cable.

Connect the square end of the USB cable to the projector’s TypeB
(square) USB port. Connect the flat end of the cable to any USB port on your 
computer. You can also connect an audio cable or microphone.

 

Follow the on-screen instructions to install the Epson USB Display software. If 
you see warning messages, click OK or Continue. (Software is installed only 
the first time you connect the computer.) Press the USB button on the remote 
control if necessary.

Network (LAN)

Connect the projector to your network using an Ethernet® cable. See “Project 
over the network” for more information.

Microphone

Connect a dynamic or condenser microphone to the Mic port, using a 3.5 mm 
mini-jack cable.

Video Player

Connect up to 4 video devices and use the remote control to switch between 
them.

RCA video cable  

(composite video)

(optional)

S-Video  

cable

(optional)

Component video 

to VGA cable

(optional)

Audio cable  

(optional)

Interactive Whiteboard or Document Camera

Connect an interactive whiteboard or document camera to the projector’s 
TypeA

(flat) USB port.

For information on playing sound through the projector or connecting an 
external monitor, see the User’s Guide on your projector CD.

Using the remote control
Make sure the batteries are installed as shown (two AA batteries).

Change 

presentation 

slides (USB 

connection only)

Navigate 

projector 

menus

Choose which 

source to display

Control projector volume

Turn projector 

on and off

Turn off projector 

display and sound

You can use the remote control to operate the projector. With the USB cable, 
you can use the remote as a wireless mouse. For more information on using the 
remote control, see your User’s Guide

Turn on your equipment
1
  Turn on your computer or video source.
2  Make sure the power cord is connected and plugged into an electrical 

outlet.

3  Press the power button on the projector or remote control.

Power light

Power button

 

The

power light flashes green, then stays on.

 

NOTE: To shut down the projector, press the

power button twice.

4  If you don’t see an image, press the Source Search button on the  

remote control to select the image source.

 

NOTE: If you still see a blank screen or have other display problems, see 
the troubleshooting tips on the back of this sheet.

5  If you need to focus the image, first slide the switch to open the air filter 

cover on the side of the projector. Then raise or lower the focus lever to 
sharpen the image.

Air filter cover switch

Focus lever

Project over the network
Install EasyMP® Network Projection on each computer that will project over 
the network. Use the CD labeled Epson Projector Software for Meeting & 
Monitoring
 to install EasyMP Network Projection. If you need to configure 
the projector for your network, see “Network Configuration” on the back of 
this sheet.

1  Press the LAN button on the remote control.

2  Start EasyMP Network Projection on your computer.
 

Windows®: Select

or Start > Programs or All Programs > EPSON 

Projector > EasyMP Network Projection.

 

Mac OS® X: Double-click the EasyMP Network Projection icon in your 
Applications folder.

3  Select Advanced Connection Mode and click OK.

4  Select the projector you want to connect to, then click Connect
 

If you don’t see the projector you want, click the Automatic search 
button.

5  If you see a message asking for a keyword, enter the four digits that 

appear on the LAN standby screen and click OK.

 

Your computer image is projected, with a floating toolbar:

 

When you’re done presenting, click Disconnect on the toolbar.

 

NOTE: Using the optional Wireless LAN module, you can project 
wirelessly. To purchase the Wireless LAN module or other accessories, 
see “Optional Accessories” on the back of this sheet. For more 
information about using the projector on a network, see the 
User’s 
Guide and EasyMP Network Projection Operation Guide on your 
projector CD.

PowerLite® 450W/460

*411850400*

*411850400*

0.476035s