Garmin GPSMAP 7410xsv Installation Instructions

Garmin Chartplotter/Sonar Combos Installation Instructions - GPSMAP 7410xsv.
Download
Page  of 8
4.4, 1788 votes
background image

GPSMAP® 7400/7600 

Series

Installation Instructions

Important Safety Information

 WARNING

See the Important Safety and Product Information guide in the 

product box for product warnings and other important 

information.
When connecting the power cable, do not remove the in-line 

fuse holder. To prevent the possibility of injury or product 

damage caused by fire or overheating, the appropriate fuse 

must be in place as indicated in the product specifications. In 

addition, connecting the power cable without the appropriate 

fuse in place will void the product warranty.

 CAUTION

Always wear safety goggles, ear protection, and a dust mask 

when drilling, cutting, or sanding.

NOTICE

When drilling or cutting, always check what is on the opposite 

side of the surface.

To obtain the best performance and to avoid damage to your 

boat, install the device according to these instructions.
Read all installation instructions before proceeding with the 

installation. If you experience difficulty during the installation, 

contact Garmin® Product Support.

Registering Your Device
Help us better support you by completing our online registration 

today.
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a photocopy, in a safe 

place.

Contacting Garmin Product Support
• Go to www.garmin.com/support for in-country support 

information.

• In the USA, call 913-397-8200 or 1-800-800-1020.
• In the UK, call 0808 238 0000.
• In Europe, call +44 (0) 870 850 1241.

Software Update
You may need to update the device software when you install 

the device or add an accessory to the device.
Loading the New Software on a Memory Card

Insert a memory card into the card slot on the computer.
Go to www.garmin.com/support/software/marine.html.

Select Download next to "Garmin Marine Network with SD 

card."

Read and agree to the terms.
Select Download.
Select Run.
Select the drive associated with the memory card, and select 

Next > Finish.

Updating the Device Software

Before you can update the software, you must obtain a 

software-update memory card or load the latest software onto a 

memory card.
Turn on the chartplotter.
After the home screen appears, insert the memory card into 

the card slot.
NOTE: In order for the software update instructions to 

appear, the device must be fully booted before the card is 

inserted.

Follow the on-screen instructions.
Wait several minutes while the software update process 

completes.
The device returns to normal operation after the software 

update process is complete.

Remove the memory card.

NOTE: If the memory card is removed before the device 

restarts fully, the software update is not complete.

Tools Needed
• Drill and drill bits

◦ Bail mount: drill bits appropriate for the surface and 

hardware

◦ Flush mount: 13 mm (1/2 in.) drill bit, 7.2 mm (5/16 in.), and 

3.5 mm (1/8 in.) drill bit

• #2 Phillips screwdriver
• Jigsaw or rotary tool
• File and sandpaper
• Marine sealant (recommended)

Mounting Considerations

NOTICE

This device should be mounted in a location that is not exposed 

to extreme temperatures or conditions. The temperature range 

for this device is listed in the product specifications. Extended 

exposure to temperatures exceeding the specified temperature 

range, in storage or operating conditions, may cause device 

failure. Extreme-temperature-induced damage and related 

consequences are not covered by the warranty.

Using the included hardware and template, you can mount the 

device using one of two methods. You can use the included 

bracket and hardware to bail mount the device, or you can use 

the included template and hardware to flush mount the device in 

the dashboard.
When selecting a mounting location, you should observe these 

considerations.

• The location should provide optimal viewing as you operate 

your boat.

• The location should allow for easy access to all device 

interfaces, such as the keypad, touchscreen, and card 

reader, if applicable.

• The location must be strong enough to support the weight of 

the device and protect it from excessive vibration or shock.

• To avoid interference with a magnetic compass, the device 

should not be installed closer to a compass than the 

December 2014

Printed in Taiwan

190-01841-02_0A

Related Manuals for Garmin GPSMAP 7410xsv

0.603586s