Garmin GPSMAP 7215 Quick Reference Guide

Garmin GPS Quick Reference Guide - GPSMAP 7215.
Download
Page  of 2
4.4, 1509 votes
background image

Creating and Navigating a Route

Navigating Using a Chart

Navigating to a Point on a Chart

 CAUTION

The Auto Guidance feature of the Bluechart g2 Vision data card is based on electronic chart 

information. That data does not assure obstacle and bottom clearance. Carefully compare the 

course to all visual sightings and avoid any land, shallow water, or other obstacles that may be 

in your path.
When using Go To, a direct course and a corrected course may pass over land or shallow water. 

Use visual sightings and steer to avoid land, shallow water, and other dangerous objects.
Note: The Fishing chart is available with a preprogrammed BlueChart g2 Vision data card.
1.  From the Home screen, select 

Charts.

2.  Select Navigation Chart or Fishing Chart.
3.  Select where you want to go:

For the GPSMAP 6000 series, press the Rocker to select the location using the  

cursor ( ).
For the GPSMAP 7000 series, touch the navigation chart to select the location using  

the cursor ( ).

4.  Select Navigate to.
5.  Complete an action:

Select Go to to navigate directly to the location.
Select Route to to create a route to the location, including turns.
Select Guide to to use Auto Guidance.

6.  Review the course indicated by the magenta line.

Note: When using Auto Guidance, a gray line within any part of the magenta line indicates 

that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the 

minimum safe water depth and the minimum safe obstacle height settings.

7.  Follow the magenta line, steering to avoid land, shallow water, and other obstacles.



Creating and Navigating a Route from Your Present 

Location

You can create and immediately navigate a route on the Navigation chart or the Fishing chart. 

This procedure does not save the route or the waypoint data.
Note: The Fishing chart is available with a preprogrammed BlueChart® g2 Vision® data card.
1.  From the Home screen, select 

Chart.

2.  Select Navigation Chart or Fishing Chart.
3.  Complete an action:

For the GPSMAP 6000 series, use the Rocker to 

select a destination using the cursor ( ).
For the GPSMAP 7000 series, touch a destination 

using the cursor ( ).

4.  Select Navigate to > Route to.
5.  Indicate the location where you want to make the 

last turn toward your destination:

For the GPSMAP 6000 series, use the Rocker to 

select a last-turn location using the cursor.
For the GPSMAP 7000 series, touch a last-turn 

location using the cursor.

6.  Select Add turn.
7.  If you want to add additional turns, repeat steps 5 

and 6, working backward from the destination to the 

present location of your boat.
The last turn you add should be where you want to make the first turn from your present 

location. It should be the turn that is closest to your boat.

8.  Select Done when the route is complete.
9.  Review the course indicated by the magenta line.
10. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.

Go To

Guide To (BlueChart g2 Vision)

Destination Selected

Turn Selected

GPSMAP®

 6000/7000 series

quick reference guide

0.537456s