Garmin GND 10 Black Box Bridge Owner's Manual | Page 5

Garmin Sail Owner's Manual - GND 10 Black Box Bridge.
Download
Page  of 10
4.7, 2317 votes
background image

Introduction

 WARNING

See the Important Safety and Product Information guide in the 

product box for product warnings and other important 

information.

Device Configuration
NOTE: 
Certain functions are available only if the appropriate 

sensors are connected to the device.
The GMI 20 allows you to view data provided by sensors 

connected to the device on a NMEA 2000® or NMEA® 0183 

network.

Select to return to the previous menu or to the instrument 
screen.
Select to view the menu for an instrument or screen.

 or 

Select to scroll through instrument pages and menus.
Select to view the display settings.
Select twice to view backlight settings.
Hold to view the power off settings.

Profiles

Profiles are collections of instrument pages that can be 

customized. Profiles can be made up of instrument pages that 

display similar data, such as fuel data or engine data.
During the initial setup, you can select one of four preset 

profiles, or you can create a custom profile. You can select a 

different profile at any time.
Powerboat: By default, this page displays instrument pages 

that show GPS speed information, position coordinates, 

bearing to waypoint, distance to the next waypoint, and a 

GPS trip odometer.

Sailboat: By default, this page displays instrument pages that 

show apparent wind speed, GPS heading, GPS speed, 

position coordinates, bearing to waypoint, distance to the 

next waypoint, and a GPS trip odometer.

Fishing: By default, this page displays instrument pages that 

show GPS speed, water temperature, and depth.

Engine/Fuel: By default, this page displays instrument pages 

that show engine and fuel information. Available engine 

information includes RPM, trim, temperature, voltage, oil 

pressure, fuel pressure, boost pressure, and coolant 

pressure. Fuel information includes fuel flow rate, fuel tank 

level, estimated total fuel onboard, fuel pressure, fuel 

economy, and cruising range.

Custom (1,2,3): Empty profiles that allow you to build a new 

custom profile. Custom profiles do not contain any preset 

instrument pages.

Selecting a Profile
Select   > Profiles > Select Profile.
Select a profile.

Renaming a Profile
Select   > Profiles > Rename Profile.
Select   or   to scroll through the letters.
Select Select to select a letter.
Select Done.

Creating Custom Profiles
You can create up to three custom profiles. You can add up to 

ten pages from multiple instrument collections to a custom 

profile.
Select   > Profiles > Select Profile.
Select Custom 1Custom 2, or Custom 3.
Select a page.
Select an instrument or multiple instruments.
Select an option:

• To continue adding instrument pages to the custom 

profile, select Yes.

• To complete the custom profile, select No.

Locking a Profile
You can lock a profile so no changes can be made to the data 

fields, page layout, or number of pages that can display at one 

time.

Select 

 > Profiles > Lock Profile > Yes.

Unlocking a Profile

Select 

 > Profiles > Unlock Profile > Yes.

Restoring Profiles to their Default Settings
You can restore unlocked profiles to their factory default 

settings.
Select   > Profiles > Reset Defaults.
Select Current Profile or All Profiles.
Select Yes.

Instrument Pages

Cycling Through Instrument Pages

From the Instrument page, select 

 or  .

Using Auto Scroll
You can use auto scroll to automatically cycle through all of the 

instrument pages.
From the instrument page, select  .
Select System > Auto Scroll > On.
Select a time duration for how long each instrument page 

displays.

Select Done.

Configuring the Data Fields
Data provided on an instrument page can be shown in various 

ways depending upon the instrument page that is displayed.

Select 

 > Configure Data Fields.

Introduction

1

Related Manuals for Garmin GND 10 Black Box Bridge

0.563586s