Garmin GMR 606 User's Manual | Page 6

Garmin Radar Detector User's Manual - GMR 606.
Download
Page  of 14
4.9, 2152 votes
background image

GMR 600/100 Series Installation Instructions

Connecting the Radar to the Garmin Marine Network

For a stand-alone network (chartplotter and radar only), attach the RJ-45 marine network cable to the RJ-45 socket on the back of the 

chartplotter. For an expanded network (including a chartplotter, radar, a GMS 10, etc.), attach the RJ-45 marine network cable to an open RJ-45 

socket on the GMS 10 network expander. Tighten the RJ-45 locking ring clockwise until it is firmly sealed.

GMR 600/100 series 

radar

Garmin Marine Network-

compatible chartplotter

Stand-Alone Garmin Marine Network Example

Expanded Garmin Marine Network Example

xx

xxxxxxxxxxxxxxxxxxxxxxxxx

Garmin 

GPSMAP 000/5000 

series chartplotter

GSD  sounder unit

To transducer

Garmin  

GPSMAP 000 series 

chartplotter

GMS 10 marine network port expander

GDL 0/0A 

XM weather receiver

GMR 600/100 series 

radar

nOTe: Each component of the expanded network must be installed according to its installation instructions. These diagrams only show how a 

GMR 404/406 radar interacts with a network and do not show proper wiring for other network components.
nOTe: Every device connected to the Garmin Marine Network must be connected to the power supply for the boat. These diagrams show the 

network connections; however, they do not show the power connections. Wire each device according to the appropriate installation instructions.

0.490223s