Garmin GMR 606 xHD Open Array Radar and Pedestal Quick Start Manual
September 2012
190-01266-02 Rev. D
Printed in Taiwan
GMR™ 400/600/1200 xHD Radar Installation Instructions
Properly install your GMR 400/600/1200 xHD radar according to the following instructions. If you experience difficulty installing the
chartplotter, seek the assistance of a professional installer, or contact Garmin® Product Support.
Before installing your GMR 400/600/1200 xHD radar, confirm that the package contains the items listed on the box. If any parts are missing,
contact your Garmin dealer immediately.
WarnInG: Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.
WarnInG: The selected radar mounting location must be able to hold the weight of the radar and withstand any inertial forces.
WarnInG: The radar transmits electromagnetic energy. It is important that the radar is turned off or the DC power input is disconnected when
personnel are required to come close to the radar to perform work on the radar assembly or associated equipment. Electromagnetic energy is harmful.
CaUTIOn: When the radar is transmitting, do not look directly at the antenna at close range, because the eyes are the most sensitive part of the body to
electromagnetic energy.
nOTICe: When drilling or cutting, always check the opposite side of the drilling or cutting surface.
Product Registration
Help us better support you by completing our online registration today. Go to http://my.garmin.com. Keep the original sales receipt, or a
photocopy, in a safe place.
Contact Garmin
Contact Garmin Product Support if you have any questions while installing your GMR 400/600/1200 xHD radar. In the USA, go to
www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to www.garmin.com/support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by
phone at +44 (0) 870.8501241.
Needed Tools
For Installing the Radar:
• #2 Phillips screwdriver
• 5 mm Allen wrench
• Drill and drill bits
• Wrench and socket set
For Installing the Optional Field-Installable RJ-45 Network Connector:
• Knife
• Pliers
• 15 mm wrench
• AMP modular-plug hand tool and die set or compatible equivalent
Related Manuals for Garmin GMR 606 xHD Open Array Radar and Pedestal
-
Garmin GPS RV 760LMT Owner's Manual
24 pages
-
Garmin GPS nuvi 2597LMT Owner's Manual
22 pages
-
Garmin GPS nuvi 2797LMT Owner's Manual
22 pages
-
Garmin GPS echoMAP 50s Owner's Manual
38 pages
-
Garmin GPS nüvi 760 Owner's Manual
66 pages
-
Garmin GPS GPSMAP 2010/2010C Owner's Manual
104 pages
-
Garmin GPS eTrex 20 Owner's Manual
60 pages
-
Garmin GPS GPSMAP 62 Owner's Manual
60 pages
-
Garmin GPS Oregon 650 Owner's Manual
22 pages
-
Garmin GPS Oregon 650t Owner's Manual
22 pages
-
Garmin GPS GPS 12 Owner's Manual
66 pages
-
Garmin GPS GPSMAP 76 Owner's Manual
86 pages
-
Garmin GPS Edge Touring Plus Owner's Manual
14 pages
-
Garmin GPS Forerunner 305 Owner's Manual
80 pages
-
Bushnell GPS BackTrack Point >3 Owner's Manual
60 pages
-
Garmin GPS nuvi 2595 Owner's Manual
88 pages
-
Garmin GPS nuvi 52LM Owner's Manual
32 pages
-
Parrot GPS CK3100 LCD User's Manual
26 pages
-
Garmin GPS GPS GNS 430W User's Manual
22 pages
-
Garmin GPS NUVI 265W User's Manual
60 pages
-
Garmin GPS Approach S2 Owner's Manual
4 pages
-
Garmin GPS eTrex 20x Owner's Manual
60 pages
-
Garmin GPS eTrex 30x Owner's Manual
60 pages
-
Garmin GPS Nuvi 1450 Owner's Manual
72 pages