Garmin GMR 1206 xHD Installation Instructions

Garmin Radar Installation Instructions - GMR 1206 xHD.
Download
Page  of 16
4.7, 1718 votes
background image

September 2012 

190-01266-02 Rev. D 

Printed in Taiwan

GMR™ 400/600/1200 xHD Radar Installation Instructions

Properly install your GMR 400/600/1200 xHD radar according to the following instructions. If you experience difficulty installing the 

chartplotter, seek the assistance of a professional installer, or contact Garmin® Product Support.
Before installing your GMR 400/600/1200 xHD radar, confirm that the package contains the items listed on the box. If any parts are missing, 

contact your Garmin dealer immediately.

  WarnInG: Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.

  WarnInG: The selected radar mounting location must be able to hold the weight of the radar and withstand any inertial forces.

  WarnInG: The radar transmits electromagnetic energy. It is important that the radar is turned off or the DC power input is disconnected when 

personnel are required to come close to the radar to perform work on the radar assembly or associated equipment. Electromagnetic energy is harmful.

  CaUTIOn: When the radar is transmitting, do not look directly at the antenna at close range, because the eyes are the most sensitive part of the body to 

electromagnetic energy.

  nOTICe: When drilling or cutting, always check the opposite side of the drilling or cutting surface.

Product Registration

Help us better support you by completing our online registration today. Go to http://my.garmin.com. Keep the original sales receipt, or a 

photocopy, in a safe place.

Contact Garmin

Contact Garmin Product Support if you have any questions while installing your GMR 400/600/1200 xHD radar. In the USA, go to 

 www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to www.garmin.com/support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by 

phone at +44 (0) 870.8501241.

Needed Tools

For Installing the Radar:

•  #2 Phillips screwdriver
•  5 mm Allen wrench
•  Drill and drill bits
•  Wrench and socket set
For Installing the Optional Field-Installable RJ-45 Network Connector:

•  Knife
•  Pliers
•  15 mm wrench
•  AMP modular-plug hand tool and die set or compatible equivalent

0.580381s