Garmin GHP 20 System with SmartPump Installation Instructions

Garmin Autopilots Installation Instructions - GHP 20 System with SmartPump.
Download
Page  of 20
4.2, 2294 votes
background image

GHP 20 Installation Instructions 

1

GHP™ 20 Steer-by-Wire Installation 

Instructions

To obtain the best possible performance and to avoid damage to your 

boat, install the Garmin® GHP 20 marine autopilot system according 

to the following instructions. Professional installation of the autopilot 

system is highly recommended.
This autopilot system is designed to interface with your specific type of 

boat. If you are not sure that this system is designed for use with your 

boat, contact your Garmin dealer or Garmin product support.
Read all installation instructions before proceeding with the 

installation. If you experience difficulty during the installation, contact 

Garmin Product Support.
NOTE: There is an installation checklist on the last page of these 

instructions. Remove the last page and refer to the checklist as you 

proceed through the GHP 20 installation.

Registering the Device

•  Go to http://my.garmin.com. 
•  Keep the original sales receipt, or a photocopy, in a safe place.
For future reference, write the serial number assigned to each 

component of your GHP 20 system in the spaces provided on page 3. 

The serial numbers are located on a sticker on each component.

Contacting Garmin Product Support

•  Go to www.garmin.com/support and click Contact Support for in-

country support information.

•  In the USA, call (913) 397.8200 or (800) 800.1020.
•  In the UK, call 0808 2380000.
•  In Europe, call +44 (0) 870.8501241.

Important Safety Information

 WaRnInGS

You are responsible for the safe and prudent operation of your 

vessel. The GHP 20 is a tool that will enhance your capability to operate 

your boat. It does not relieve you from the responsibility of safely 

operating your boat. Avoid navigational hazards and never leave the 

helm unattended.
Always be prepared to promptly regain manual control of your boat.
Learn to operate the GHP 20 on calm and hazard-free open water.
Use caution when operating the GHP 20 near hazards in the water, such 

as docks, pilings, and other boats.
See the Important Safety and Product Information guide in the product 

box for product warnings and other important information.

 CautIon

Equipment to be connected to this product should have a fire enclosure 

or be provided with a fire enclosure.
Always wear safety goggles, ear protection, and a dust mask when 

drilling, cutting, or sanding.

Notice

When drilling or cutting, always check the opposite side of the surface. 

Be aware of fuel tanks, electrical cables, and hydraulic hoses.

Related Manuals for Garmin GHP 20 System with SmartPump

0.604163s