Garmin echoMAP 50s Owner's Manual | Page 10

Garmin GPS Owner's Manual - echoMAP 50s.
Download
Page  of 38
4.6, 2471 votes
background image

station indicator, the height of the tide at the station appears 

above the station indicator.
Current direction indicators appear as arrows on the chart. The 

direction of each arrow indicates the direction of the current at a 

specific location on the chart. The color of the current arrow 

indicates the range of speed for the current at that location. 

When you move the cursor over the current direction indicator, 

the specific current speed at the location appears above the 

direction indicator.

Color

Current Speed Range

Yellow

0 to 1 knot

Orange

1 to 2 knots

Red

2 or more knots

Showing and Configuring Tides and Currents
NOTE: 
This feature is available with premium charts, in some 

areas.
You can show static or animated tide and current station 

indicators on the Navigation chart or Fishing chart.
From the Navigation or Fishing chart, select Menu > Chart 

Setup > Tides & Currents.

Select an option:

• To show current station indicators and tide station 

indicators on the chart, select On.

• To show animated tide station indicators and animated 

current direction indicators on the chart, select Animated.

Showing Satellite Imagery on the Navigation Chart
NOTE: This feature is available with premium charts, in some 

areas.
You can overlay high-resolution satellite images on the land or 

on both land and sea portions of the Navigation chart.
NOTE: When enabled, high-resolution satellite images are 

present only at lower zoom levels. If you cannot see high-

resolution images in your optional chart region, you can select 

 to zoom in. You also can set the detail level higher by 

changing the map zoom detail.
Select Charts > Navigation Chart > Menu > Navigation 

Chart Setup > Photos.

Select an option:

• Select Land Only to show standard chart information on 

the water, with photos overlaying the land.

• Select Photo Map Blend to show photos on both the 

water and the land at a specified opacity. Use the slider 

bar to adjust the photo opacity. The higher you set the 

percentage, the more the satellite photos cover both land 

and water.

Viewing Aerial Photos of Landmarks

Before you can view aerial photos on the Navigation chart, you 

must turn on the Photo setting in the chart setup.
NOTE: This feature is available with premium charts, in some 

areas.
You can use aerial photographs of landmarks, marinas, and 

harbors to help orient yourself to your surroundings or to 

acquaint yourself with a marina or a harbor prior to arrival.
From the Navigation chart, select a camera icon:

• To view an overhead photo, select 

.

• To view a perspective photo, select 

. The photo was 

taken from the location of the camera, pointed in the 

direction of the cone.

Select Review > Aerial Photo.

Automatic Identification System
The Automatic Identification System (AIS) enables you to 

identify and track other vessels, and alerts you to area traffic. 

When connected to an external AIS device, the chartplotter can 

show some AIS information about other vessels that are within 

range, that are equipped with a transponder, and that are 

actively transmitting AIS information. The information reported 

for each vessel includes the Maritime Mobile Service Identity 

(MMSI), location, GPS speed, GPS heading, time that has 

elapsed since the last position of the vessel was reported, 

nearest approach, and time to the nearest approach.

AIS Targeting Symbols

Symbol Description

AIS vessel. The vessel is reporting AIS information. The 
direction in which the triangle is pointing indicates the 
direction in which the AIS vessel is moving.
Target is selected.

Target is activated. The target appears larger on the chart. A 
green line attached to the target indicates the heading of the 
target. The MMSI, speed, and direction of the vessel appear 
beneath the target, if the details setting has been set to 
Show. If the AIS transmission from the vessel is lost, a 
message banner appears.
Target is lost. A green X indicates that the AIS transmission 
from the vessel is lost, and the chartplotter displays a 
message banner asking whether the vessel should continue 
to be tracked. If you discontinue vessel tracking, the lost 
target symbol disappears from the chart or the 3D chart view.
Dangerous target in range. The target flashes while an alarm 
sounds and a message banner appears. After the alarm has 
been acknowledged, a solid red triangle with a red line 
attached to it indicates the location and the heading of the 
target. If the safe-zone collision alarm has been set to Off, the 
target flashes, but the audible alarm does not sound and the 
alarm banner does not appear. If the AIS transmission from 
the vessel is lost, a message banner appears.
Dangerous target is lost. A red X indicates that the AIS 
transmission from the vessel is lost, and the chartplotter 
displays a message banner asking whether the vessel should 
continue to be tracked. If you discontinue vessel tracking, the 
lost dangerous target symbol disappears from the chart or the 
3D chart view.
The location of this symbol indicates the closest point of 
approach to a dangerous target, and the numbers near the 
symbol indicate the time to the closest point of approach to 
that target.

Heading and Projected Course of Activated AIS 

Targets
When heading and course over ground information are provided 

by an activated AIS target, the heading of the target appears on 

a chart as a solid line attached to the AIS target symbol. A 

heading line does not appear on a 3D chart view.
The projected course of an activated AIS target appears as a 

dashed line on a chart or a 3D chart view. The length of the 

projected course line is based on the value of the projected 

heading setting. If an activated AIS target is not transmitting 

speed information, or if the vessel is not moving, a projected 

course line does not appear. Changes in the speed, course over 

ground, or rate of turn information transmitted by the vessel can 

impact the calculation of the projected course line.
When course over ground, heading, and rate of turn information 

are provided by an activated AIS target, the projected course of 

the target is calculated based on the course over ground and 

the rate of turn information. The direction in which the target is 

turning, which is also based on the rate of turn information, is 

indicated by the direction of the barb at the end of the heading 

line. The length of the barb does not change.

4

Charts and 3D Chart Views

0.508048s