Garmin AIS 300 User's Manual

Garmin GPS User's Manual - AIS 300.
Download
Page  of 8
4.3, 1179 votes
background image

Use these instructions to install the Garmin® AIS 300 Automatic Identification System (AIS) Class B receiver device. Compare the contents 

of this package with the packing list on the box. If any pieces are missing, contact your Garmin dealer immediately.
Use the following instructions to install the AIS 300 device. Details for the following steps are included in this document:
1. SelectlocationsfortheAIScomponents.
2. MounttheAIS300receiverbox.
3. ConnecttheAIS300topower.
4. ConnecttheAIS300toaVHFantennaandtoanoptionalVHFradio(page4).
5. ConnecttheAIS300toaNMEA2000networkortoaNMEA0183-compatiblechartplotter(optional-page4).

 WARNING

When navigating, carefully compare information provided by the unit to all available navigation sources, including information from visual 

sightings, local waterway rules and restrictions, and maps. For safety, always resolve any discrepancies or questions before continuing 

navigation.
Use this unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring precise measurement of direction, distance, 

location, or topography.
This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or 

reproductive harm. This Notice is provided in accordance with California’s Proposition 65. See www.garmin.com/prop65 for more 

information.

 CAutIoN

Wear safety goggles and a dust mask when drilling, cutting, or sanding.

Safe Compass Distance

Ensure that you install the AIS 300 receiver box at least 15 3/4 in. (40 cm) from any compass. Test your compass to verify that it operates 

correctly when the AIS 300 is operating.

Selecting Locations for the AIS 300 Components

Use the wiring layout diagrams starting on page 2 to determine how to best organize the AIS 300 components on your boat. Ensure that the 

cables reach all components before permanently mounting any component.

Mounting the AIS 300 Receiver Box

Install the AIS 300 receiver box below deck on a bulkhead. Select a location that is dry and protected from washdown. Ensure that the 

location is well ventilated and away from objects that generate heat. Ensure that the receiver box is at least 15 3/4 in. (40 cm) from any 

compass to avoid interference.

Needed tools

Drill and drill bits
Number 2 Phillips screwdriver

to mount the receiver box:

1. Ensurethatthechosenlocationisdry,protectedfromwashdown,andwell-ventilated.
2. Usethereceiverboxasatemplate,anduseapenciltomarktheholesinthefourcorners.Donotdrillthroughthereceiverbox.
3. Drillfour1/8in.(3mm)pilotholes.
4. Mountthereceiverboxusingtheincluded20mmM3.5screws.Youcanalsousebolts,washers,andnuts(notincluded)tomountthe

receiverboxifthemountingsurfaceissuitable.


March2010

190-01178-00Rev.B

PrintedinChina

AIS 300 Installation Instructions

0.507552s