Fujitsu FI-6130 Troubleshooting | Page 7

Fujitsu Scanner Troubleshooting - FI-6130.
Download
Page  of 20
4.3, 1794 votes
background image

fi-6130/fi-6230 Image Scanner Getting Started 

2

■ Removable Parts
The following shows the parts that can be removed from the 
scanner.

1.3 Operator Panel
The operator panel is located on the right side of the scanner. 
This panel is comprised of a Function Number Display, four 
buttons, and a LED.

*) About the settings on the launcher, refer to FUJITSU 

TWAIN32 scanner driver help and the "fi-6130/fi-6230 
Operator’s Guide" in the Setup CD-ROM.

■ Indications on the Function 

Number Display

Brake roller

Can be
removed

Can be
removed

ADF paper chute

Document cover

Pick roller

[fi-6230 only]

Check

Function Number
Display
Function button

Send to button

Scan/Stop button

Check LED

Power button/LED

Function

Send to

Scan
/Stop

Power

Name

Function

Function Number Display

Indicates the Function 

Number and error status. 

For details, refer to 
"Indications on the Function 

Number Display" below.

Buttons

Function

Changes the Function 
activated by the Send to 

button (*).

Send to

• Launches the linked application 

software (*).

• Resets an error.

Scan/Stop

• Launches a linked application 

software.

• Resets an error.

• Cancels ongoing scanning.

Power

Turns on and off the scanner.

LED

Check

Blinks to indicates an error.

Power

Stays illuminated when the 
scanner is turned on.

Indication

Descriptions

8

Lights only one time upon turning on the 

scanner.

P

Indicates that the scanner has been turned 

ON and is being initialized.

0

Indicates that initialization will soon be 

completed.

1

Indicates that initialization has been 

completed successfully.

This status is called "Ready Status." 

J
U

Indicates that a recoverable error occurred 

during scanning with the image scanner. 

"U" or "J" and an "error number" is 

displayed alternately. When an error is 

indicated, press the [Scan] or [Send to] 

button to return to the Ready Status ("1").

E
F
C
H
A
L

Indicates that an abnormality (alarm) 

occurred in the image scanner during its 

initialization or during scanning.

"E", "F", "C", "H", "A", or "L" and an 

"alarm number" is displayed alternately.

When the alarm number is displayed, press 

the [Scan] or [Send to] button to return to 

the Ready Status.

When an alarm is indicated, turn off the 

scanner once, and then turn it on. If the 

alarm persists, contact your service 

engineer, the store where you purchased 

the scanner, or an authorized service 

provider.

Also See for Fujitsu FI-6130

0.487216s