Frigidaire FFSG5115PA Installation Instructions | Page 10

Frigidaire Dryer Installation Instructions - FFSG5115PA.
Download
Page  of 76
4.3, 2198 votes
background image

10

INSTALLATION REQUIREMENTS

NOTE

To achieve an installation with 0” (0 cm) clearance 

for the back of the dryer (for other than straight back 

venting), a quick-turn 90° dryer vent elbow must be 

installed as described previously in this manual.

Clearance requirements, continued

MINIMUM INSTALLATION CLEARANCES - Inches (cm)

SIDES

REAR

TOP

FRONT

 Alcove

0” (0 cm) 0” (0 cm)* 0” (0 cm)

n/a

 Under-

 Counter

0” (0 cm) 0” (0 cm)* 0” (0 cm)

n/a

 Closet

0” (0 cm) 0” (0 cm)* 0” (0 cm)

1” (2.5 cm)

0”

(0cm)

0”

(0cm)

1”

(2.54cm)

0”

(0cm)

*  For other than straight back venting, a quick-turn 90° 

dryer vent elbow (vented right or down in free-standing 

dryer or right on pedestal-mounted dryer) must be 

installed to achieve 0” (0 cm) installation.

60 sq. in.

(387.1cm²)

3”

(7.6cm)

60 sq. in.

(387.1cm²)

3”

(7.6cm)

closet door

Installation in a Recess or Closet

  1  A dryer installed in a bedroom, bathroom, recess or 

closet, MUST be exhausted outdoors.

  2  No other fuel burning appliance shall be installed in 

the same closet as the gas dryer.

  3  Your dryer needs the space around it for proper 

ventilation.

DO NOT install your dryer in a closet with a solid door.
  4  Closet door ventilation required: A minimum 

of 120 square inches (774.2 cm²) of opening, 

equally divided at the top and bottom of the 

door, is required. Openings should be located 3 

inches (7.6 cm) from bottom and top of door. 

Openings are required to be unobstructed when a 

door is installed. A louvered door with equivalent 

air openings for the full length of the door is 

acceptable.

0.584304s